background image

 

ULW Czech, s.r.o. 

V Ráji 34, Praha 9 

Hostavice, 198 00, CZ, IČO: 28256212, DIČ: CZ28256212

 

 

Carpe Iter Pad v3 Manual 

v2.3 

April 9, 2022 

Applicable models: v3 

(“

Device

 

or “

CI Pad

Table of contents 

1. 

General description ......................................................................................................................... 1 

2. 

Accessories ...................................................................................................................................... 1 

3. 

Before first use ................................................................................................................................ 2 

4. 

Controlling elements, ports ............................................................................................................. 2 

5. 

Use 

 Android general tips .............................................................................................................. 4 

6. 

Use 

 Carpe Iter specifics ................................................................................................................ 5 

7. 

Charging/Battery Indicator .............................................................................................................. 6 

8. 

Operating conditions / instructions ................................................................................................ 7 

9. 

Carpe Iter Holder (“

Holder

”)

 ........................................................................................................... 8 

10. 

Power source ............................................................................................................................. 13 

11. 

Troubleshooting ........................................................................................................................ 15 

12. 

Disclaimer .................................................................................................................................. 19 

13. 

Manufacturer’s Warranty

 .......................................................................................................... 19 

 

1.

 

General description 

1.1.

 

The Device is Android powered smart device, which is able to run most applications 
designed for the respective Android generation; 

1.2.

 

Please refer to technical specifications of your model for more detailed description of the 

Device’s features and abilities

2.

 

Accessories 

2.1.

 

Standard accessories for CI Pad: 

2.1.1.

 

cloth pouch with shoulder strap; 

2.1.2.

 

USB-A to USB-C adapter; 

2.1.3.

 

SIM card adapter; 

2.1.4.

 

wall USB charger (EU style); 

2.1.5.

 

M8 charging cable with dust cap for M8 charging connector. The M8 charging 
cable mates with our proprietary 12V power source for use on vehicles with 12VDC 

Summary of Contents for v3





















Reviews: