CNR-SW2 Manual v1.0
Canyon NavMaster
Features
Altimeter
z
Altitude Measuring Range : -500 to 9000 meter or -1,600 to
29500 feet
z
Resolution of 0.5 meter or 1 feet
z
Total
Altitude
Gain
z
Trip timer : 9 hr 59 min 59 sec
z
Current ascending or descending Speed
z
Average ascending or descending Speed
Electronic Compass
z
3-mode display showing a compass arrow direction, numeric
and cardinal readouts
z
with highly accuracy of +-5 degree and a resolution of 1
degree
z
a magnetic distortion alerts “Err” when external magnetic
interference occurs
z
automatic
shut-off
Thermo Alarm Clock
z
Perpetual calendar with day of week
z
Snooze alarm clock
z
Thermometer
(-10
degree
to + 50 degree
)
z
12/24
hr, selectable
z
Max/Min memory for Thermometer
Battery Installation
Computer Watch
Remove the back cover of the computer with a screwdriver, install
the 3.0V-battery with the po) pole facing up and replace the
cover. Remove the battery and reinsert it if the LCD displays
irregular figures. This will clear and restart the computer’s
microprocessor.
3V-Battery CR2032
Display Icons & Keys Illustration
Icons:
Heading Direction Time mode
Alarm ON / OFF Afternoon
Alarm Snooze Temperature in Celsius
Battery Low Temperature in Fahrenheit
Compass mode Maximum memory
Altimeter mode Minimum memory
To wake Up and set your computer
z
Press and hold both button A and C until all segments on.
Meter / Feet Selection
Right after all segments on, the “M” digit will start to flicker.
To select M (Meter) or Ft (Feet), press button C and then press
button A to confirm.
Selection
z
Right after Meter/Feet selection, the Celsius digit will then
start to flicker
z
To
select
or , press button C and then press button A to
confirm.
Clock Setting
z
Right
after selection, the “24H” digits will then start to
flicker, press button C to select 12H or 24H hour format
z
Press button A to confirm and then the hour digits will start to
flicker.
