24 Sp
Manual de Instrucciones
Operating Instructions and Parts Manual
DG441500CK
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain
the product described. Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Description
This 14" AC cut-off saw is designed for
easy and flexible operation in the fields
of engineering, communication,
construction, metallurgy, electric
power, chemical industry, and etc. It is
ideal for cutting materials such as steel
pipes, cast iron pipes, round steel, angle
iron, box iron, and flat steel. Please
familiarize yourself with the major
components of this tool before use.
Unpacking
When unpacking this product, carefully
inspect for any damage that may have
occurred during transit.
General Safety
Information
This manual contains information that is
very important to know and under-stand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
Warning indicates
a potentially hazardous situation
which, if not avoided, could result in
death or serious injury.
Caution indicates a
potentially hazardous situation which,
if not avoided, may result in minor or
moderate injury.
Notice indicates
important information, that if not
followed, may cause damage to
equipment.
The following safety precautions must
be followed at all times along with any
other existing safety rules.
NOTICE
!
CAUTION
!
WARNING
!
DANGER
IN714500AV 3/06
For parts, product & service information
visit
www.chpower.com
BUILT TO LAST
© 2006 Campbell Hausfeld/Scott Fetzer
See Warranty on page 7 for important information about commercial use of this product.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
1. Read all manuals included with this
product carefully. Be thoroughly
familiar with the controls and the
proper use of the equipment.
2. Only persons well acquainted with
these rules of safe operation should
be allowed to use this tool.
WORK AREA:
•
Do not operate a power
tool in an explosive atmosphere,
such as in the presence of
flammable liquids, gases, or dust.
Power tools create sparks which
may ignite the fumes or dust.
•
Keep work area clean and well lit.
Cluttered benches and dark areas
invite accidents.
•
Keep bystanders, children, and
visitors away while operating a
power tool. Distractions can cause
you to lose control.
!
CAUTION
!
WARNING
ELECTRICAL SAFETY:
•
Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges, and refrigerators. There is
an increased risk of electrical shock
if your body is grounded.
•
Do not abuse cord.
- Never carry power tool by its cord.
- Never pull the cord to disconnect
from receptacle. Pull the plug at
the wall rather than the cord
when disconnecting power tools.
•
Keep cord away from heat, oil,
sharp edges or moving parts.
Replace damaged cords
immediately. Damaged cords
increase the risk of electric shock.
•
Make sure cord is located so that it
will not be stepped on, tripped
over, or otherwise subjected to
damage or stress.
!
WARNING
14" AC
Cut-off Saw
Specifications
Wheel Dimensions
- Outer Diameter . . . . . . . .14 inches
- Inner Diameter . . . . . . . . .1 inch
- Thickness . . . . . . . . . . . . .1/8 inch
Outer Linear Velocity
of Wheel
. . . . . . . . . . . . > 262 f/s
Voltage
. . . . . . . . . . . . . . .120 V, 60 Hz
Nominal Input
Capacity
(A) . . . . . . . . . .15
No load speed
(r/min) . . .3600
Dimension
inches . . . . . . .21.25 x 11.5 x 15.75
mm . . . . . . . . .
355 x 25.4 x 3.2
Net Weight
. . . . . . . . . . .47 lbs.
Vibration
(m/s
2
) . . . . . . . .1.109
Noise
(dB(a)) . . . . . . . . . . .Lp = 89.6,
. . . . . . . . . . . . . . . . . . . . .Lw = 102.6
Maximum Cutting
Depth
. . . . . . . . . . . . . .3.5 inches
Garantía Limitada
1
DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación:
Un año
2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company
100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400
3. QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor)
del producto Campbell Hausfeld.
4. PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier herramienta a motor de Campbell Hausfeld
proporcionada o fabricada por el garante.
5. COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro
del período de validez de la garantía.
6. LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:
A. Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES
PARTICULARES, ESTAN LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto
es empleado para uso comercial, industrial o para alquiler, no se aplicará ninguna garantía. En algunos
estados no se permiten limitaciones a la duración de las garantías implícitas, por lo tanto, en tales casos
esta limitación no es aplicable.
B. CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN
DEFECTO, FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados
no se permite la exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales
casos esta limitación o exclusión no es aplicable
C. Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones
de funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos
accidentes, abusos por parte del comprador, o falta de operar el producto siguiendo las instrucciones
del manual de instrucciones suministrado también debe incluir la desconexión o modificación de los
instrumentos de seguridad. Si dichos instrumentos de seguridad son desconectados, la garantía
quedaría cancelada.
D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.
7.
RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida
el Garante, los productos o componentes que estén defectuosos, se hayan dañado o hayan dejado
de funcionar adecuadamente, durante el período de validez de la garantía
8.
RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:
A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.
B. Entregar o enviar el producto o componente Campbell Hausfeld al Centro de Servicio autorizado
Campbell Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.
C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los)
manual(es) del propietario
Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos.
Usted también puede tener otros derechos que varían de un Estado a otro. o de un país a otro.