Model
#
634W
Piezo Keypad
W/ Wiegand Output
Protocol: Wiegand 26
Power Supply: 12 to 28 VDC
Power Standby Consumption: less than 30 mA
(40mA when illuminated)
Mounting: Single Gang Switch Box, or directly to the wall.
Environment: IP68; 100% relative humidity
Temperature: - 40° to + 70°C
CLICK-N-LOCK mounting screw protection
26 BIT WIEGAND SPECIFICATIONS:
WIRING
COLOR
FUNCTION ELECTRICAL
FUNCTION
RED
Input Voltage
12 - 28 VDC
BLACK Ground
GREEN
Data 0
Open collector 1K ohm pull-up to in5V
WHITE
Data 1
Open collector 1K ohm pull-up to in5V
BROWN LED
Input
BLUE
CCTV output
Open collector 0.25 A activated with each key for 30 Sec.
VIOLET
Housing Ground
YELLOW
Site Code Select
ORANGE Buffered
Input
GREY
Tamper Output
Open collector 0,100 A "Low" when light sensed
When the LED control input is pulled low, the GREEN LED will be ON and the RED LED will be
OFF. When the input goes high the RED LED is ON and the GREEN LED is OFF. The RED LED
will flash with each key press. The LED control input is pulled to the in5v with a 2.2K
resistor.
The data is sent at 1 msec per bit with a pulse duration of 50 usec.
A Buzzer beeps with each key press.
5151 Everest Drive, Unit #6, Mississauga, ON L4W 2Z3 Tel: 905-366-3377 Fax: 905-366-3378
