background image

User’s Guide

Extron Electronics, USA

1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500  
Fax 714.491.1517

Extron Electronics, Europe

Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040  
Fax +31.33.453.4050

Extron Electronics, Asia

135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400  
Fax +65.6383.4664

Extron Electronics, Japan

Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan 
+81.3.3511.7655  
Fax +81.3.3511.7656

www.extron.com

© 2004  Extron Electronics.  All rights reserved.

Installation, cont’d

Redundant Matrix Switcher Power Supply

Matrix 3200/6400 Power Supply

68-355-08  

Rev. A

Printed in the USA

06 04

AC power output 
cable

AC power input 
cable

Figure 3 — Power supply connections

7

.

Connect the AC input cable to the power supply (figure 2).

8

.

Install the spring bracket into the tall
stand-off identified in step 4.

9

.

Press the power supply’s notched edge
into the spring bracket at the selected
installation location.

10

.

Using the tall stand-off as a pivot
point, swivel the power supply into
position until the captive screw
connector engages the short stand-off.

11

.

Hand tighten the captive screw connector.

12

.

Connect the DC output cable (the cable connected in step 5)
to either unused power connector on the main board (the
board on the floor of the switcher).

Use an already-installed power supply as an example to
orient the connector correctly.

13

.

Route cable out of the way and secure it with tie wraps.

14

.

Reinstall any cables and reinstall the front panel door.
Reconnect power to the matrix switcher.

Part Numbers

5 V power supply kit for 7U BME

70-083-01

5 V power supply kit for 5U BME

70-083-02

12 V power supply kit for audio BME

70-084-01

Spring
Bracket

Mounting
Screw

Tall 
Stand-off

im Vertrieb von

            CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201
Fax 07131 911203

[email protected]

Reviews: