© 2021 Carrier
1 / 12
P/N 466-5559-
EN • REV E • ISS 15OCT21
NXG-183x-EUR Series Keypad User Manual
1
Description
The NXG-183x-EUR is an interface for users of the
xGenConnect family of security systems.
Figure 1: NXG-183x Keypad layout
(1) Graphical screen
(2) Card reader active area
(3) Status LED
(4) Arm Stay button
(5) Arm Away button
(6) Functional buttons A, B, C, D
(7) System Info (
i
) button
(8) Disarm button
(9) Cancel button
(10) Navigation buttons: Up (2),
Down (8), Left (4), Right (6)
(11) Enter button (
)
(12) Selection button (5)
Entering a PIN
You will need to enter a valid PIN to access various features
and system information.
After a period of inactivity, a screensaver will appear, and the
keypad will go into power save mode. Press any button to
wake it up. A screen will appear requesting to enter your PIN.
A valid PIN is required to unlock the screen and access the
system.
Enter Your Code, then
****
Enter a valid user code followed by Enter. User PINs can be
between 4 and 8 digits in length. The default master user PIN
is 1234.
If the PIN is invalid for the feature you are trying to access, the
Access Denied warning message will be shown.
Permissions are assigned to users and keypads to determine
what features a user can access and at what times. If you are
unable to access a feature, contact your installation company
or building manager.
Using Cards
NXG-1832-EUR and NXG-1833-EUR keypads are equipped
with a Mifare card reader that allows you to use cards to log
into the system and perform particular operations (NXG-180x-5
series of cards).
The cards/fobs must be presented close to the keypad display,
preferably in the middle of the screen area (item 1 in Figure 1).
•
Once the card is recognized, the reader generates a
single beep sound.
•
If the card is being held by the reader for a second, the
reader will generate double beep sound.
•
If the card is still being held by the reader for another
second, the reader will generate triple beep sound.
By removing the card after single/double/triple beep, user can
select which functions are to be triggered.
Every beep level can be independently configured to any
combination of the following actions:
•
logging into the system
•
arming/disarming
•
triggering system scenes or actions
•
unlocking the door
See
xGenConnect Installation and Programming Guide
for
more details.
Note:
Card functions are triggered only if the keypad shows
the screensaver or the main screen.
Cards are inactive when the user already entered keypad
menus, or is in the process of arming/disarming. The exception
is the User Cards menu.
See “Programming Cards” on page 6
for details.
System status
The xGenConnect security system displays system status
messages on the screen (Figure 1, item 1). For example, the
main screen below shows the Fault system status category.
Fault
Press
i
for Info
To get more details about the system fault, press the System
Info (
i
) button.
(1)
(4)
(5)
(7)
(8)
(6)
(9)
(11)
(10)
( )
3
(12)
(2)
