background image

WIRELESS FLASH TRANSCEIVER V5 DUO

USER MANUAL

CORPORATE OFFICE:

Harvest One Limited

9D On Shing Ind. Bldg.,

2-16 Wo Liu Hang Road,

Fo Tan, Hong Kong

Please contact your local dealer for customer services.

EXCEPT  AS  MENTIONED  ABOVE,  GIVEN  BY  ANY  PERSON  OR  ENTITY  WITH 

RESPECT TO THE WIRELESS  FLASH  TRANSCEIVER  SHALL  BIND  HARVEST  ONE 

LIMITED. HARVEST ONE LIMITED SHALL NOT BE LIABLE FOR LOSS OF REVENUES 

OR  PROFITS,  INCONVENIENCE,  EXPENSE  FOR  SUBSTITUTE  EQUIPMENT  OR 

SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA OR ANY OTHER 

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE OR 

MISUSE  OF,  OR  INABILITY  TO  USE,  THE  WIRELESS  FLASH  TRANSCEIVER, 

REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN 

IF  HARVEST  ONE  LIMITED  HAS  BEEN  ADVISED  OF THE  POSSIBILITY  OF  SUCH 

DAMAGES. IN NO EVENT SHALL RECOVERY OF ANY KIND AGAINST HARVEST ONE 

LIMITED  GREATER  IN  AMOUNT  THAN  THE  PURCHASE  PRICE  OF  THE  CACTUS 

WIRELESS  FLASH  TRANSCEIVER  SOLD  BY  HARVEST  ONE  LIMITED  OR  ITS 

AUTHORIZED  DEALERS  AND  CAUSING  THE  ALLEGED  DAMAGE.  WITHOUT 

LIMITING THE  FOREGOING, YOU  ASSUME  ALL  RISK  AND  LIABILITY  FOR  LOSS, 

DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR 

PROPERTY  ARISING  OUT  OF  USE  OR  MISUSE  OF,  OR  INABILITY  TO  USE,  THE 

CACTUS  WILRESS  FLASH  TRANSCEIVER  NOT  CAUSED  DIRECTLY  BY  THE 

NEGLIGENCE OF HARVEST ONE LIMITED. THIS LIMITED WARRANTY SHALL NOT 

EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF HARVEST ONE 

LIMITED, OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES 

YOUR EXCLUSIVE REMEDY.

© HARVEST ONE LTD. 2013

2nd edition, June 2013

Summary of Contents for V5

















Reviews: