background image

Comprobador de enchufes y localizador de protecciones

C-LOGIC 3600UK

SKU: CLOGIC3600UKCBINT

MANUAL DE INSTRUCCIONES

ESPAÑOL 

ESP

La función del comprobador de enchufes y localizador de protecciones es detectar el fusible 

o protección correspondiente a un enchufe.

alimentación de una toma AC o un punto de iluminación.

 Advertencia

Por  favor  tome  precauciones  extremas  al  utilizar  el  instrumento  con  un  elevado  arco 

eléctrico  de  las  protecciones.  No  lo  utilice  si  el  voltaje  es  superior  a  120V/230V AC. 

Puede encender la linterna en entornos oscuros.

CARACTERÍSTICAS

•  Encuentra de forma rápida y automática la protección o fusible correctos.

• 

e.

•  Funciona en circuitos de 220V AC

•  Temperatura de funcionamiento: 0-50ºC

FUNCIONAMIENTO: LOCALIZACIÓN DE LA PROTECCIÓN O FUSIBLE

•  Sitúe el interruptor del comprobador de enchufes en la posición izquierda.

•  Conecte el comprobador en el enchufe.

•  Diríjase al cuadro de protecciones de la instalación.

•  Encienda el receptor. La luz roja se encenderá.

•  Coloque la punta del receptor sobre el dispositivo de protección o fusible.

•  Deslice la punta del receptor a lo largo de cada dispositivo de protección. El receptor emitirá 

pitidos de forma continua en función de la fuerza de la señal recibida.

•  Deslice de nuevo el receptor en cada protección. A la tercera vez, el receptor emitirá un 

pitido, la luz roja se apagará y la luz verde se encenderá solo en el dispositivo de protección 

que alimenta al enchufe seleccionado.

•  Abra  el  dispositivo  de  protección  y  compruebe  que  la  luz  LED  en  el  comprobador  de 

correcto.

COMPROBACIÓN DEL ENCHUFE

•  Sitúe el interruptor del comprobador de enchufes en la posición derecha.

•  Por favor, observe las indicaciones mostradas en la etiqueta del comprobador de enchufes.

MANTENIMIENTO

•  Mantenga limpio los dispositivos con un trapo húmedo.

•  Cuando el LED amarillo esté encendido en el receptor, por favor desatornille y retire la tapa 

y coloque una nueva de 9V para que el receptor funcione correctamente.

C-LOGIC 3600UK

SKU: CLOGIC3600UKCBINT

INSTRUCTION MANUAL

ENGLISH 

EN

or fuse and test socket.

You will have annoyance no more far locating the corree! circuit breaker supplying power to an 

 Warning

Please caution extremely when use the C-LOGIC 3600UK in the gigantic circuit breaker ark. 

surroundings.

FEATURES

• 

• 

•  C-LOGIC 3600-Tx Works on 220V AC, C-LOGIC 3600-TB Works on 11 0V AC

•  Operating temperature: 0 - 50ºC

OPERATION: LOCATING A CIRCUIT BREAKER OR FUSE

•  Keep the pillar at left on the C-LOGIC 3600UK

• 

install a socket adapter befare make sure the switch is OFF. then plug the C-LOGIC 3600UK 

into  the  socket  adapter,turn  the  switch  on  at  one  time.  (Socket  adapter  need  purchase 

additional)

•  Go to the circuit breaker panel box.

•  Turn the C-LOGIC 3600UK on, the red LED is light.

•  Place the chapiter of the C-LOGIC 3600UK directly onto the circuit breaker or fuse.

•  Slide the chapiter of the C-LOGIC 3600UK down each breaker along both si des of the panel. 

Then the C-LOGIC 3600UK will beep frequently as it denote the relative signal strength.

•  Move the C-LOGIC 3600UK down each breaker once more. On the third pass, the C-LOGIC 

3600UK will beep ,the red LED will quench and the green LED will light only at the circuit 

Breaker powering the C-LOGIC 3600UK.

•  Push the breaker off and check that the LED on the C-LOGIC 3600UK in the outlet is off to 

TEST SOCKET

•  Keep the pillar at right on the C-LOGIC 3600UK.

•  Please contradistinguish nameplate on the C-LOGIC 3600UK.

MAINTENANCE

•  Keep clean with a dry cloth.

•  When the yellow LED is light on the C-LOGIC 3600UK, please unscrew and

•  Remove cover, insert new 9V battery so as to the C-LOGIC 3600UK is well-balanced.

DESCARGA MANUAL COMPLETO

FULL MANUAL DOWNLOAD

FABRICANTE / MANUFACTURER:

MGL International

APAC: 

MGL GLOBAL SOLUTIONS LTD

[email protected]

Flat 4-1, 4/F, No. 35, Section 3 Minquan 

East Road. Taipei, Taiwan.

Tel: +886 2-2508-0877
EMEA: 

MGL EUMAN S.L.

[email protected]

Parque Empresarial Argame, 33163 

Morcín. Asturias, Spain.

Tel: +34 985-08-18-70

AMERICAS: 

MGL AMERICA, LLC.

[email protected]  

US East Coast:

 2810 Coliseum Centre 

Drive, Ste. 100. Charlotte, North Carolina, 

28217 USA

Tel: +1 833 533-5899

US West Coast:

 760 Challenger Street. 

Brea, California 92821 USA

Tel: +1 310-728-6220

www.mgl-intl.com

Plug the C-LOGIC 3600UK into the receptacle. If there is a candescent light fixture, please

Reviews: