C. B. Gitty Crafter Supply Cigar Box Ukulele Kit Assembly Instructions Manual Download

Page: 1 / 14

y Cra

er Supply 1

Maybe you’d like to play a little love song for the apple of your eye, or possibly plink your way over

the island rainbow like the late, great IZ. Maybe you’re looking to build your first instrument by hand.

No matter what your motivation, you too can play soft, mellow tones on your very own hand-built ci-

gar box ukulele in no time.

This guide will walk you through the assembly of the C. B. Gitty Cigar Box Ukulele kit. Using just a few basic

tools you will construct a fully playable, great-sounding and awesome-looking concert (also known as alto)

cigar box ukulele, sure to be the envy of friends and

neighbors alike. The ukulele is a very fun and easy-to-

play instrument with a unique, happy sound, and your

cigar box uke will provide many hours of musical enjoy-

ment.

Kit Inventory

Refer to the labeled photo above to identify each of the parts in your kit. Verify that everything is present and

that you are familiar with what’s what.

A. Plain Wooden Craft Box

Hardwood ukulele neck blank

Rosewood ukulele fret board

Set of nylon ukulele strings

Rosewood ukulele bridge

Cigar

Box

Ukulele

Kit

Assembly

Instructions

Product Number 36

‐

009

‐

View this guide in full color online:

www.CBGi y.com/CBUkeKit

Need Parts?

Visit

www.CBGi y.com/ukulele

‐

parts/

for

our full line of uke parts and hardware!

Summary of Contents for Cigar Box Ukulele Kit














Search results

Summary of Contents for Cigar Box Ukulele Kit

Reviews:

Related manuals for Cigar Box Ukulele Kit

Brands by name

Popular brands

C. B. Gitty Crafter Supply Cigar Box Ukulele Kit, Assembly Instructions Manual

Search results

Summary of Contents for Cigar Box Ukulele Kit

Reviews:

Related manuals for Cigar Box Ukulele Kit

Brands by name

Popular brands