3
2
Connect the antenna to your TV
Connect the TV to the mains socket
...and switch on
insert plug...
UK plug
4
To switch the TV on
Insert the batteries into the Remote Control
1
Lift the cover on the back of the remote gently. Insert two
AAA
batteries. Make sure the (+) and (-) signs match
(observe correct polarity). Place the cover back on.
1.
Connect the power cord to the 220-240V AC, 50 Hz.
Then the standby LED lights up.
To switch on the TV from standby mode either:
2.
Press the “ ” button,
P/CH+ / P/CH-
or a numeric button
on the remote control or;
3.
Press the control switch located on the left side of the
TV.
By either method the TV will switch on.
REAR OF THE TV
Quick Start Guide
DLED48287FHD
Helpline No: 0345 6040105
