INSTRUCTIONS
To fit your Keyguard XL you
will need the following tools:
• Power Drill
• 5mm Masonry Drill Bit
• Small Socket Driver
• 8mm Socket Head
• Marker Pen
NOTE: Your Keyguard XL
should be fitted to a solid
surface. We recommend
brickwork, stone or concrete
• To start use the rubber
cover as your template to
mark the fixing holes on the
wall. Ensure you choose a
location that allows the best
possible fixing e.g. the centre
of a brick. N.B. You must
never fix into the mortar
• Push the bolts that have
been supplied with your
Keyguard XL into each of
the holes
• Tighten each bolt fully using
a socket set
• Now use the 5mm drill bit
to make a hole 55mm deep in
each of the marked fixing holes
• Place the Keyguard XL
inside the rubber case
• Open the door of your
Keyguard XL and place the
whole unit onto the wall lining
up the holes
Tools
Fixing holes
FITTING YOUR KEYGUARD
Place
5 mm
TROUBLESHOOTING
• Once the fitting is complete
if the door closes but does
not lock, test locking it when
the door is in the open
positon. If it works, it is likely
that the fixing bolts are
protruding too far into the
Keyguard XL. Try to secure
them further into the wall and
close the door again
• If the buttons will not press,
ensure that the dial is in the
vertical position
• If your code does not work,
press the
“clear”
button and
start again
• Fixing kit - anchor bolt
• Fixing kit - concrete screw
with pan head
• Fixing kit - concrete screw
75 mm (for rendered walls)
• Fixing kit - concrete screw
100 mm (for rendered walls)
If you require the fitting
instructions for any of the
above please visit the website
or call our office during office
hours on
01484 663388
for
further assistance.
www.burtonsafes.co.uk/products/
keyguard-digital-xl/
1
2
3
4
5
6
7
8
9
0
A B
Vertical Position
Burton Safes offer a range of fixing
bolts to suit different applications
that retain the security
specification:
Clear Button
Instruction booklet
Standard fixing bolts
In the event of a product
malfunction please contact
Burton Safes Ltd
Burton Safes Ltd. Brockholes
Holmfirth HD9 7BN
Tel: 01484 663388
!
02/01/2022 V.1 Page 2 of 2
