background image

Ontario,  Calitornia 91762 

ASSEMBLY  & OPERATING  INSTRUCTIONS 

MODEL 41628 

MODEL 41629 

TABLE OF CONTENTS 

4 Burner Stainless Steel,  Rotisserie, Built-In,  L.P. (Propane) 

4 Burner Stainless Steel,  Rotisserie, Built-In, N.G.  (Natural Gas) 

PAGE 

SAFETY INSTRUCTIONS.......................  ........................................................................... 

INSTALLATION INSTRUCTIONS....................................................................................................  4 

LIGHTING & OPERATING  INSTRUCTIONS........  .........  .....................................................................  9 

ROTISSERIE COOKING........................  .............  .........................................................................  12 

CLEANING & MAINTENANCE  . . . ... ..... . .. .... .. ... . .. . .. .... .. .. .. . . . .. ... ... . ... ... ..... .. . . .. . .. ... . . . . . . . .. . .. . .. . . . . .. ..... .... ..  14 

TROUBLESHOOTING  . . . . . . . . . . . . . . . . . . .. . . . . .. . . . . .. . . . . . . . . .. . .. . . . . . . .. . . . . . . .. .. . . . . . . . . .. . . .. .. . .. .. .. .. . . . .. . . .. .. . . .. .. . . .. . .. ...  15 

PARTS LIST.................................................................................................................................  16 

WARRANTY ...................................................................................................................................  18 

READ THE FOLLOWING  INSTRUCTIONS CAREFULLY AND  BE SURE YOUR GRILL IS PROPERLY INSTALLED, ASSEMBLED 

AND CARED FOR. FAILURE TO  FOLLOW THESE INSTRUCTIONS MAY  RESULT IN  SERIOUS BODILY INJURY AND/OR 

PROPERTY DAMAGE. IF YOU  HAVE QUESTIONS CONCERNING ASSEMBLY OR OPERATION, CONSULT YOUR DEALER, 

GAS APPLIANCE SERVICE REPRESENTATIVE OR YOUR GAS COMPANY 

NOTETOINSTALLER: 

■ ■   

LEAVE THESE INSTRUCTIONS WITH  THE CONSUMER AFTER INSTALLATION. 

  

NOTE TO  THE CONSUMER: 

RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. 

THIS OUTDOOR COOKING GAS APPLIANCE IS  NOT  INTENDED TO  BE  INSTALLED IN  OR ON  RECREATIONAL VEHICLES 

AND/OR BOATS. 

Revision 01/06 

- -----..i,._

Summary of Contents for 41628



















Reviews: