![background image](http://html1.mh-extra.com/html/bubbli/bbbttlstera/bbbttlstera_quick-start-manual_2825825001.webp)
Electric Steam Steriliser
BBBTTLSTERA
Quick Start Guide
Please read and follow all instructions regarding the use of this product.
Product Specifications
Rated voltage:
220 – 240V~
Rated frequency:
50Hz
Rated power:
150W
Heating element:
PTC
Product Warnings
•
For adult use only. Keep out of reach of children.
•
The steriliser contains boiling water during use. DO NOT touch any hot surfaces or the
steam emitting from the vent.
•
Use only on a hard, flat, stable surface. DO NOT place the steriliser on or near a hot gas
or electric burner, or on top of any other electrical appliances.
•
The steriliser is fitted with a cable that has a cord band which should be used to tie any
excess cable together. NEVER leave excess cable loose on work surfaces, especially
when children are present.
•
If the supply cable or unit is damaged, do not use it. Contact the Kogan customer
support team immediately for advice.
•
Unplug the steriliser from the power socket under the following conditions: no water in
the unit, unit is being filled with water, unit is not in use, unit is being moved or unit is
being cleaned.
•
DO NOT immerse the base unit in water or any other liquids.
•
For home use only. Not suitable for outdoor use.
Usage Instructions
Sterilise
1.
Before placing the bottles and accessories (teats, caps etc.)
into the steriliser, they must all be washed and thorough rinsed
in fresh water, then emptied.
2. Remove the Bottle Container from the Base unit, then place the
bottles inside UPSIDE DOWN. This is important so that the
steam can enter the bottles easily.
3. Place the accessories into the Accessory Grid, then cover with
the lid. Fill the Measuring Cup to the top of the marked line with
90ml of fresh water, then pour into the Base Heating Element.
•
DO NOT EXCEED OR REDUCE THE VOLUME OF WATER.
•
DO NOT PUT THE ACCESSORY GRID IN UPSIDE DOWN.
DO NOT TAKE THE GRID OUT OF THE CONTAINER.
4. Assemble the unit parts, then place on the Base Heating
Element.
1