background image

GEO  TRANSIT

OPERATOR’S MANUAL

1 –  

Orientation ........................................................................   

Page(s):  

1

2 –  

Magnetic Declination .......................................................................   5

3 –  

Azimuth Measurement ....................................................................   7 

4 --  

Inclination & Percent Grade Measurement ...............................    11

5 –  

Strike & Dip Measurement ............................................................   14

6 –  

Trend & Plunge Measurement .....................................................    15

7 –  

GEO Transit & Topographic Map Use .........................................   16

8 –  

Additional Measurements ............................................................    18

9 –  

Prospecting .....................................................................................    19

10 –  

Reference Material .......................................................................   25

11 –  

Specifications ................................................................................   26

12 –  

Service ............................................................................................   26

i

Copyright BRUNTON, 2001

Printed in U.S.A.

form 11-GEO rev. 0109

Owner’s Purchase Record

Model  _______________________________________________________

Date of Purchase   ______________________________________________

Dealer Purchased From: _________________________________________

_____________________________________________________________

Serial #:

Summary of Contents for GeoTransit


















Reviews: