![background image](http://html.mh-extra.com/html/brother/tn-2010/tn-2010_instructions_55794001.webp)
Toner that doesn’t cost the earth
Printed on recycled paper, using refilled cartridges
© Zinetic.co.uk. All Rights Reserved
INSTRUCTIONS FOR REFILLING BROTHER TN 2010 CARTRIDGE
BROTHER DCP-7055, DCP 7055W, DCP-7057, HL-2130. HL -2132, HL-2135W
When to refill:
The Brother machine lets you know when you are low on toner using a series of LED lights on the printer.
You can
force the printer to continue to print
and use up as much toner as possible by selecting
CONTINUE MODE.
TONER LOW - The Toner LED will turn on for 2 seconds and off for 3 seconds -
ignore message - Keep printing
In “Stop mode” you would be required to empty and refill at this point.
However you can use the CONTINUE MODE to override this default setting and
print for longer see below.
How to select Continue mode
:
HL 2130 /2132/2135W machines :
To force the machine to continue printing after the LEDs indicate REPLACE TONER, press Go seven times to
enter “Continue mode” (all the LEDs flash twice, and then the Ready LED turns on).
The machine will then continue printing until the LEDs indicate TONER ENDED
DCP 7055 / DCP 7055W machines – there is no GO Button. So follow instructions below
Press Menu, press arrow keys to choose 1.General Setup and press OK,
Press arrow keys to choose 4.Replace Toner, and press OK,
Press arrow keys to choose Continue and press OK.
The machine will then continue printing until the LEDs indicate TONER ENDED
(To return to the default setting (Stop mode), press Go seven times (all the LEDs flash once).
Replace toner (CONTINUE MODE) – the toner light is on but you can continue to
print.
CONTINUE MODE - Toner Light on continuously with error light lit - machine will
not print – Empty it and Refill it (TONER ENDED)
You must now empty and refill.