BC951
MODE
RESET
SET
Front Unit
System Reset Button
Battery hole
Back Unit
INSTRUCTION
Product Overview
Product Overview
Remove the battery tab from your 3D Pedometer by pulling the tab
outwards.This will automatically begin the set up.The first screen
that will appear will be the TIME screen.
●
How to Set Time, Weight, and Stride Length
1. At any screen display showing
(Except Memory function screen display),
Press
SET
and hold over 5 seconds, display TIME SET ''12H'' showing.
2. Press
RESET
to switch 24 hour clock and 12 hour clock.
3. Press
SET
, display HOUR & MIN and the ''HOUR'' flashing.
4. Press
RESET
to advance by 1.
For the rapid advance, Press
RESET
and hold over 2 seconds.
Press
MODE
to deduct by 1.
For the rapid deduct, Press
MODE
and hold over 2 seconds.
5. Press
SET
, display HOUR & MIN and the ''MIN'' flashing.
6. Press
RESET
to advance by 1.
For the rapid advance, Press
RESET
and hold over 2 seconds.
Press
MODE
to deduct by 1.
For the rapid deduct, Press MODE and hold over 2 seconds.
7. Press
SET
, display ''WEIGHT'' flashing.
( defult value 150 Ibs, setting range 45 ~ 350 Ibs. )
8. Press
RESET
to advance by 1.
For the rapid advance, Press
RESET
and hold over 2 seconds.
Press
MODE
to deduct by 1.
For the rapid deduct, Press
MODE
and hold over 2 seconds.
9. Press
SET
, display ''STRIDE LENGTH'' flashing.
( defult value 3 feet, setting range 1 ~ 6 feet. )
10. Press
RESET
to advance by 0.25.
For the rapid advance, Press
RESET
and hold over 2 seconds.
Press
MODE
to deduct by 0.25.
For the rapid deduct, Press
MODE
and hold over 2 seconds.
11. Press
SET
, display will show the step/clock.
Getting Started
Before using your 3D Pedometer for the first time, you will need
to set it up so that it is personalized for you by following the
instructions below.
Procedures in Actual Use
●
How to change the display
Press
MODE
and it will allow you to view one of the following screens:
●
How to use Memory function
Exercise step / Exercise value mode
Memory funciton
( Step / Exercise Step ) ( Distance / Calories )
Step / clock mode
Distance / Speed mode
Calories / Fat burn mode
Active time / Zone step mode
※
The Zone step will only be counted if
display under this mode.
1 days before
Press
RESET
change to Distance/Calories memory mode
.
Step / Exercise Step
1 days before
Distance / Calories
Each time you press
SET
, you can see the data of seven days from
the oldest day to the previous day.
Press
SET
after 7 days before, display will show Total step / Total
Exercise Step for the 7 days total.
Step / Exercise step and Distance / Calories Mode
Days
