Micro
Joystick
Instructions
Quite simply - the simplest joystick ever!
All functions are controlled with the joystick which has 3 modes;
1. Pan & Tilt
2. Zoom & Focus
3. Menu Scroll & select
The modes are changed with the touch-down switch on the joystick. You can either
tap
the switch or
hold
down
the switch.
A
tap
is less than 0.5 second
A
hold down
is more than 0.5 second
The joystick powers up in
Pan & Tilt
mode. To toggle between
Pan & Tilt
mode and
Zoom & Focus
mode, just
tap
the joystick switch.
To enter
Menu Scroll
mode,
hold down
the joystick switch. Then use the joystick to navigate the menu.
To exit
Menu Scroll
mode,
hold down
the joystick switch.
Connections;
DC jack : 12
– 35v
XLR4: on a flying lead. This has both power & data for a remote head.
Note:
The supplied power supply is 12w. This is enough for some cameras but not for others. Check the
power consumption of the camera you are using. Include the lens motors if fitted. If needed, use a 2
nd
power supply near to the camera with a break-out cable.
There is a connector on the PCB inside which can be used to connect a
Remote Camera Panel
or other
equipment into the system. When data is being received the LED will flash.
Note:
Not all functions apply to all camera models. Check camera specification for applicable functions.
