background image

Introduction __________________________________________1

 

Installation ___________________________________________2

 

1. Mount the Display _____________________________________ 2

 

2. Mount the Transducer _________________________________ 2

 

Outside Hull Mount __________________________________________3

 

Inside Hull Mount ____________________________________________5

 

3. Route the Transducer Cable ____________________________ 5

 

4. Route & Connect the Power Cable _______________________ 5

 

Functions and Features ________________________________6

 

Power on and off, demo mode __________________________________6

 

Set and adjust features ________________________________________6

 

Fishing with the 2100 __________________________________9

 

How Your 2100 Works________________________________________9

 

Reading the Graph ___________________________________________9

 

Maintenance ________________________________________10

 

Specifications ________________________________________11

 

If You Are Having Problems____________________________11

 

Accessories and Replacement Parts ______________________13

 

Bottom Line Warranty and Service Policy _________________13

 

Figures and Illustrations 

Figure 1:

 Outside Hull Mount

______________________________________4

 

Figure 2.  

Tournament 2100

 

Display

_________________________________8

 

Figure 3.  

SONAR beam (cross-section)

______________________________9

 

 

I

NTRODUCTION

 

Congratulations on your purchase of the Bottom Line

 Tournament 2100

!  

Your new SONAR includes Bottom Line’s advanced high-clarity bottom 

graph 

plus

 water temperature and boat speed (with optional sensor) to make 

the most out of your boating and fishing experience. 
Make sure that your package contains the following items: 

 

Tournament 2100 display unit with mounting bracket 

 

Transducer with mounting screws 

 

Power cord 

 

Warranty card (back page of this manual) 

Summary of Contents for Tournament 2100















Reviews:

Related manuals for Tournament 2100