Solving Minor Problems Yourself
Thank you for buying the TDA10 steam iron from Bosch. This iron
has a lightweight design and is built to perform.
This iron has been designed according to ecological criteria, related
to the sustainable development, analyzing its whole lifecycle –from
material selection to its later reusing or recycling– evaluating the
improvement possibilities, from a technical, economical and
environmental point of view.
These instructions contain valuable information about the unique
features of this iron and some hints to make ironing easier for you.
Please visit www.bosch-home.co.uk for more product
information or to register your product, just follow the link
to the Online guarantee registration.
Important
This appliance has been designed exclusively for domestic
use and must not be used for industrial purposes.
Carefully read through the operating instructions for the
appliance and safeguard them for future reference.
General safety instructions
• The iron must not be left unattended while it is
connected to the mains supply.
• Remove the plug from the socket before filling the
appliance with water or before pouring out the
remaining water after use.
• The appliance must be used and placed on a stable
surface.
• When placed on its stand, make sure that the surface
on which the stand is placed is stable.
• The iron should not be used if it has been dropped,
if there are visible signs of damage or if it is leaking
water. It must be checked by an authorized Technical
Service Centre before it can be used again.
• With the aim of avoiding dangerous situations, any
work or repair that the appliance may need, e.g.
replacing a faulty mains cable, must only be carried
out by qualified personnel from an Authorised
Technical Service Centre.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Keep the iron and its cord out of reach of children less
than 8 years of age when it is energized or cooling
down.
•
CAUTION. Hot surface.
Surface is liable to get hot during use.
This appliance reaches high temperatures and produces steam
during use, this could cause scalds or burns in case of improper use.
- Do not touch the soleplate! Hold the iron by its handle.
- Do not leave the power cable hanging over the table or ironing
board, to prevent the appliance from falling.
- Do not iron clothing while it is being worn!
- Never spray or aim the steam at persons or animals!
• Do not allow the power cable to come into contact with sharp
edges or with the soleplate when it is hot.
• Never rest the iron in a horizontal position when the soleplate
is hot. Rest it on its heel.
• Do not touch the appliance with wet hands when in operation.
• This appliance is to be connected and used in accordance with
the information stated on its characteristics plate.
• This appliance must be connected to an earthed socket. If it is
absolutely necessary to use an extension cable, make sure that
it is suitable for 16A and has a socket with an earth connection.
• If the safety fuse fitted in the appliance blows, the appliance
will be rendered inoperative. To restore normal operation the
appliance will have to be taken to an authorised Technical
Service Centre.
• In order to avoid that, under unfavourable mains conditions,
phenomena like transient voltage drops or lighting fluctuations
can happen, it is recommended that the iron is connected to a
power supply system with a maximum impedance of 0.26
Ω
. If
necessary, the user can ask the public power supply company
for the system impedance at the interface point.
• The appliance must never be placed directly under the tap to
fill the water tank.
• Unplug the appliance from the mains supply after each use, or
if a fault is suspected.
• The electrical plug must not be removed from the socket by
pulling the cable.
• Never immerse the iron in water or any other fluid.
• Do not leave the appliance exposed to weather conditions (rain,
sun, frost, etc.)
Tips to help you save energy
Steam production consumes the most energy. To help minimise
the energy used, follow the advice below:
• Start by ironing the fabrics that require the lowest ironing
temperature.
Check the recommended ironing temperature in the label on
the garment.
• Regulate the steam according to the selected ironing
temperature, following the instructions in this manual.
• Try to iron the fabrics while they are still damp and reduce the
steam setting. Steam will be generated from the fabrics rather
than the iron. If you tumble dry your fabrics before ironing them,
set the tumble drier on the ‘iron dry’ programme.
• If the fabrics are damp enough, turn off the steam regulator
completely.
• Stand the iron upright during pauses. Resting it horizontally with
the steam regulator on generates wasted steam.
Environmental Care
This iron has been designed according to ecological criteria,
related to the sustainable development, analysing its whole
lifecycle - from material selection to its later reuse or recycling
- evaluating the improvement possibilities, from a technical,
economical and environmental point of view.
Before disposing of a used appliance away, you should make it
noticeably inoperable e.g. cut off the mains lead and be certain
to dispose of it in accordance with current laws and regulations.
Your retailer, town council or local council can give you detailed
information about these.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment -
WEEE).
The guideline determines the framework for
the return and recycling of used appliances as applicable
throughout the EU.
GUARANTEE TERMS
The terms of the guarantee for this appliance are in accordance
with that stated by our representative for the country in which it is
sold. Details of those conditions can be obtained from the retailer
from whom the appliance was purchased. The SALES RECEIPT
must be presented when making any claims against the terms of
this guarantee. We reserve the right to make technical modifications.
Before using the Iron for the first time
Please carry out the following steps:
1. Remove the protective cover from the soleplate before using the iron.
2. While the iron is unplugged, fill the water tank (7) with tap water
3. Plug the appliance into the mains and set the temperature control
(10) to the “max” position by lining it up with the pointer (9).
4. When the iron has reached the correct temperature (the pilot
lamp No. 11 goes out), set the steam regulator (3) to the «2»
position by lining it up with the pointer.
5. Hold the iron horizontally and repeatedly press the shot of steam
button (2). Any residue should come out of the soleplate (6).
It may smoke and smell – this is normal and will cease after a
short while.
6. If necessary, carefully clean the soleplate down with a dry, folded
cloth.
Problem
Possible Causes
Solution
The iron does
not heat up.
Temperature control (10)
set to minimum.
Turn to a higher position.
No mains supply.
Check with another
appliance or plug the iron
into a different socket.
The “Secure” system has
been activated. The iron is
set to stand-by.
Move the iron gently from
side to side to reactivate it.
“Secure”
indicator lamp
(13) flashes*.
The “Secure” system has
been activated. The iron is
set to stand-by.
Move the iron gently from
side to side to reactivate it.
The clothes
tend to stick.
The temperature is too high. Turn the temperature
control (10) down and wait
until the iron has cooled
down.
Water drips out
of the soleplate
(6) together
with steam.
Temperature control (10)
setting is too low.
Turn the temperature
control to a higher setting
(between “••” and “max”)
and wait until the pilot light
(11) goes out.
Steam regulator (3) is set
too high in conjunction with
a low temperature.
Set the steam regulator to
a lower setting.
You have pressed the
shot of steam button (2)
repeatedly without waiting
for 5 seconds between
each press.
Wait 5 seconds between
each press of the jet of
steam button.
Steam does
not come out.
Steam regulator (3) is set to
“0” position.
Set the steam control to an
open steam position.
No water in the tank (7).
Fill the tank.
The temperature is too
low. Anti-drip system is
activated.
Set to a higher temperature
if compatible with the
fabric.
Spray does not
work.
No water in the tank (7).
Fill the water tank.
Obstructed mechanism.
Contact the Technical
Service.
Smoke comes
out when
connecting the
iron for the first
time.
This may be caused by the
lubrication of some of the
internal parts.
This is normal and will stop
after a few minutes.
Deposits come
out through
the holes in the
soleplate (6).
Traces of lime scale are
coming out of the steam
chamber.
Carry out a cleaning
cycle (see “Calc’nClean”
section).
* (Model dependent)
If none of the above solves the problem, get in touch with an
authorised technical service.
You can download this manual from the local homepages
of Bosch.
Sensixx’x
DA10
Register your new Bosch now:
www.bosch-home.co.uk
001 Sensixx’x DA10 GB 09/13
Customer Service
Great Britain
Bosch Customer Service
Grand Union House
Old Wolverton Road Milton Keynes
MK12 5PT
UK +44 (0)844 892 8979
IRL +353 (0)1450 2655
www.bosch-home.co.uk
en
Operating instructions
