![background image](http://html.mh-extra.com/html/bosch/hsg9583-series/hsg9583-series_specifications_38736001.webp)
Video | HSG9583 Series Outdoor Camera Housing
HSG9583 Series Outdoor Camera Housing
www.boschsecurity.com
u
NEMA-3R and IP55 enclosure ratings
u
Protects Camera/Lens Combinations up to 262 mm
(12.5 in) Length
u
Hinged Side Opening for Easy Installation and
Camera Setup
u
Aluminum and Advanced Polymer Construction
u
Sunshield Included
The HSG9583 Series Housings are smartly styled
housings, for outdoor use. These housings meet
customer requirements for camera enclosures that are
both cost-competitive and installer-friendly. Models
are available for use with 24 VAC, 115 VAC, and
230 VAC cameras, to fit a wide range of applications.
The unique hinged side-opening design facilitates easy
installation of all camera/lens combinations, and
allows access to most camera and lens controls when
the housing is in its mounted position. Power, video,
and lens control cabling can be routed through liquid-
tight fittings in the bottom rear of the housing, or for
even better cable management, via the feed-through
entry holes in the base. Mounting holes in the base
permit installation to a wide range of pan/tilts,
adjustable heads, and various camera mount brackets.
External 4-pin and BNC connectors for power and
video, located in the rear end cap, are also available
on 24 VAC and 230 VAC models. These aluminum
constructed housings are available with a factory-
installed heater and blower. The heater maintains the
internal temperature of the housing in cold
temperature conditions as low as -40°C (-40°F). In
combination with a continuous-duty blower, the unit
minimizes fogging in high humidity locations, and
extends the temperature limits. Sunshields are
included on all outdoor models.
All models accommodate installation of Dinion style
cameras with fixed focal, varifocal, or up to a 15x
motorized zoom lens.
For increased security, tamper-resistant screws are
provided for the locking clasps to prevent unwanted
access to the housing contents.
With a sleek design that meets NEMA-3R and IP55
enclosure standards, the HSG9583 Series Housings
are the optimal solution for protecting your video
surveillance equipment from adverse elements.
Installation/Configuration Notes
480
18.9
119
4.7
mm
in
434
17.1
275
10.8
50.8
2.0
19.6
.77
128
5.0
148
5.8
90.0
3.54
73.7
2.9
130
5.1
148
5.8
HSG9583/20 /21 /50 /51 /61 Housings Outdoor Units