Maintenance
For non-user replaceable light sources
The light source contained in this luminaire shall only be replaced by
the manufacturer or his service agent or a similar qualified person.
Never open the lamp when the mains supply cable is connected.
Caution, risk of electric shock
(source: IEC60417-6042 (2011-11)).
Cleaning
Do not use solvents, corrosive cleaners or the like. Use a dry or
slightly moist cloth for cleaning
only
.
Safety information
1. Prior to commissioning, make sure the right voltage is available.
2. Prior to each use, make sure the light and mains supply cable
are not damaged in any way. Never use the lamp if you find
damage.
Caution!
A damaged light or mains supply cable
pose a risk to life due to electric shock!
3. Do not use the work lamp in explosive environments in which
flammable liquids, gases or dusts are present.
Risk to life!
4. LED lights are extremely bright. Do not look directly at the lamp.
5. If the external flexible cable or cord of this luminaire is damaged,
it shall be exclusively replaced by the manufacturer or his service
agent or a similar qualified person in order to avoid a hazard.
6. Make sure the light is attached firmly and securely. Make sure
the cable is not crimped or otherwise damaged.
7. Keep children away from the lamp. Children cannot estimate the
risk of electric shock.
Disposal
Dispose of electric appliances in an
environmentally friendly manner!
Electric appliances must not be disposed of in
household waste! The European Directive 2012/19/EU on
Waste Electrical and Electronic Equipment rules that used electric
appliances should be collected separately and recycled in an
environmentally friendly manner. For possibilities of disposal of the
used appliance, please contact your local or municipal administration.
BME Group Sourcing B.V.
Walaardt Sacréstraat 405
1117BM Schiphol
The Netherlands
www.bme-group.com
Re
v_04_2021
GB
IMPORTANT! RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY!
Technical specifications
Luminous flux
8000 lm
Color temperature
5700 K
Type of protection
IP54
Protection class
I
Power
72 W
Power factor
> 0.9
Current
0.25 - 0.4 A
Nominal voltage
220-240 V~ 50/60 Hz
Operating temperature
-20 °C ~ +40 °C
Supply cable
H07RN-F 3G1.5
Dimensions
261 x 201 x 102 mm
Weight
1985 g
Proper intended use
The LED light is suitable for indoor and outdoor lighting
applications. The LED light is wired ready for connection and
comes with a connecting cable and a safety plug. When use the
light with EU plug outdoor, make sure it will plug into a IPX4 socket.
The BS and swiss plug shall be used indoors since these plugs are
not waterproof.
Operation
Setting up and turning on the light
The continuously adjustable arm can be used to set the light at
different tilt angles. The light can be turned on and off using the
switch on the back.
Projected area
0.09 m
2
Mounting height
< 3 m
INSTRUCTION MANUAL
LED Worklight
FLS8000LMACEU
102 mm
261 mm
201 mm
