Made in China
Weight Capacity: 250 lbs (113.4 kgs)
Netted Tree Glider
Package Contents
Make sure all parts are present & place
them side by side for easy identification.
x1
x1
x2
PART
1
2
3
NAME
QTY
Hanging
Kit
Netted
Tree Glider
Carry
Bag
Before Assembly:
Take the Tree Glider out of the box
and check the material. If the
material has any structural damage
(weakness) such as rips or tears at
the seams, stop use immediately.
Confirm that the supporting
structure is secure. Examples: Fix
the swing on two branches of a tree;
if only a single branch, then it
should be at least a 37”
circumference; swing set or another
strong fixing point or frame.
Inspect the Tree Glider, support
structure and the hanging hardware
(hanging kit) for defects including
but not limited to: unexpected bents
in the tubes; unwoven strains or
excessive twisting in the tree glider
ropes; rust or tears in the hanging
kit; rotten or rusty supporting
structure; etc.
1.
2.
3.
For
Hanging Kit Instructions
, please
see next page. The hanging kit is
composed of set of (2) hanging straps
with end loops; each strap has a
heavy-duty carabiner clip at one end.
ASSEMBLY INSTRUCTIONS
Step 1
Lay down all 4 sections of the Support
Tubes & Rope as illustrated above.
Step 2
Push down on the push-pins of each of
the 4 sections of the Support Tubes
into each other.
Tip:
Use a flathead screwdriver if you are
uncomfortable using your fingers to press down
on the push-pin locks of the Support Tubes.
Other Safety Precautions:
If you are not familiar with construction,
hardware or the use of tools, please use a
qualified general contractor to install.
Improper installation may cause injury.
Proceed carefully and take your time getting
into and out of your Tree Glider. Tree Gliders
may tip if your weight isn’t centered. Do not
jump on a Tree Glider since it is not a
trampoline. Excessive swinging and other
rough play may result in falls and may wear
out your Tree Glider and hardware
prematurely. Small children should not play
unsupervised in your Tree Glider.
Product Warranty:
All Bliss Hammock products are
guaranteed against manufacturing defects
for 1 full year from the date of purchase.
Damage caused by the environment,
improper use, or improper care and
maintenance is not covered
*Guarantee excludes clearance/closeout
items, non-retail, private sales, and auction
website sales.
push-pin
Product Fully
Assembled
