BLACKMER LDF1A, Installation, Operation And Maintenance Instructions

Page: 1 / 12

BLACKMER POWER PUMPS
960403
INSTRUCTIONS NO. 501-F00_apr05
INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS
Section
Effective
Replaces
501
April 2005
Sept 2003
DISCONTINUED MODELS: LDF1A, LDF1PA
TABLE OF CONTENTS Page
PUMP DATA
Technical Data ...........................................................2
Initial Pump Start Up Information................................2
INSTALLATION
Pre-Installation Cleaning ............................................3
Location
and Piping....................................................3
Pump Relief Valve and Bypass valve .........................3
Check Valves .............................................................4
Mounting ....................................................................4
Coupling
Alignment ....................................................4
Pump Rotation............................................................4
OPERATION
Pre-Start Up Check List..............................................5
Start Up Procedures...................................................5
Relief Valve Setting and Adjustment ..........................5
MAINTENANCE
Strainers........................................................................6
Lubrication.....................................................................6
Vane Replacement........................................................7
Pump Disassembly .......................................................7
Parts Replacement........................................................7
Pump Assembly ............................................................8
TROUBLE SHOOTING ......................................................10
NOTE : Numbers in parentheses following individual parts
indicate reference numbers on Blackmer Parts List No. 501-
F01.
Blackmer pump manuals and parts lists may be obtained
from Blackmer's website (www.blackmer.com) or by
contacting Blackmer Customer Service.
SAFETY DATA
This is a SAFETY ALERT SYMBOL.
When you see this symbol on the product, or in the manual,
look for one of the following signal words and be alert to the
potential for personal injury, death or major property damage
Warns of hazards that WILL cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause personal injury
or property damage.
NOTICE:
Indicates special instructions which are very
important and must be followed.
NOTICE:
Blackmer liquefied gas pumps MUST only be installed
in systems which have been designed by qualified
engineering personnel. The system MUST conform to
all applicable local and national regulations and safety
standards.
This manual is intended to assist in the installation and
operation of the Blackmer liquefied gas pumps, and
MUST be kept with the pump.
Blackmer liquefied gas pump service shall be
performed by qualified technicians ONLY. Service shall
conform to all applicable local and national regulations
and safety standards.
Thoroughly review this manual, all Instructions and
hazard warnings, BEFORE performing any work on the
Blackmer liquefied gas pumps.
Maintain ALL system and Blackmer liquefied gas pump
operation and hazard warning decals.