BLACKMER 111-G01, Инструкции по установке, эксплуатации и обслуживанию

Страница: 1 / 16

BLACKMER POWER PUMPS
965830
Page 1/16
INSTRUCTIONS NO. 111-G00
INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS
ProVane
®
Models: PVS10A, 15A, 20A, 30A, 40A, 50A
Section
Effective
Replaces
111
Oct 2008
Dec 2007
Patent Protected by U.S. Patents 6030191, 7134855
& 7316551 B2 an
d Related Foreign Patents.
TABLE OF CONTENTS Page
General Safety Data................................................1-2
PUMP DATA
Initial Pump Start Up Information................................2
Technical Data ...........................................................2
INSTALLATION
Pre-Installation Cleaning ............................................3
Location
and Piping....................................................3
Mounting ....................................................................4
Coupling
Alignment ....................................................4
Pump Rotation............................................................4
To Reverse Pump Flow..............................................4
Check Valves .............................................................4
OPERATION
Pre-Start Up Check List..............................................5
Start Up Procedures...................................................5
Running the Pump in Reverse....................................5
Flushing the Pump .....................................................6
Optional Pump Relief Valve........................................6
Optional Pump Relief Valve Setting and Adjustment..7
MAINTENANCE
Torque Table.................................................................8
Lubrication.....................................................................8
Strainers........................................................................8
Vane Replacement........................................................8
Pump Disassembly .......................................................9
Parts Replacement........................................................9
Pump Assembly ..........................................................10
Liner Intake & Discharge Identification ........................11
TROUBLE SHOOTING ......................................................13
ONLY Pump models listed below are covered in this Manual
Single Liner Models Material Parts List
PVS10A, 15A Stainless Steel 111-G01
PVS20A, 30A Stainless Steel 111-G02
PVS40A, 50A Stainless Steel 111-G03
Blackmer manuals and parts lists may be obtained from
Blackmer's website (www.blackmer.com) or by contacting
Blackmer Customer Service.
Numbers in parentheses following individual parts indicate
reference numbers on Blackmer Part Lists.
SAFETY DATA
This is a SAFETY ALERT SYMBOL.
When you see this symbol on the product, or in the manual,
look for one of the following signal words and be alert to the
potential for personal injury, death or major property damage
Warns of hazards that WILL cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause personal injury
or property damage.
NOTICE:
Indicates special instructions which are very
important and must be followed.
NOTICE:
Blackmer Pumps MUST only be installed in systems, which
have been designed by qualified engineering personnel. The
system
MUST conform to all applicable local and national
regulations and safety standards.
This manual is intended to assist in the installation and
operation of the Blackmer ProVane pumps, and
MUST be
kept with the pump.
Pump service shall be performed by qualified technicians
ONLY . Service shall conform to all applicable local and
national regulations and safety standards.
Thoroughly review this manual, all instructions and hazard
warnings,
BEFORE performing any work on the pump.
Maintain
ALL system and pump operation and hazard
warning decals.