background image

OWNERS MANUAL

REMOTE START SECURITY SYSTEM

Standard Features

The System has the following standard features:
• 5-button remote transmitter
• Status indicator (LED)
• Valet/Service mode switch
• Remote Start capabilities
• Extended Range Receiver
• Multi-tone siren (126dB)
• Dual stage impact detector
• Remote panic
• Valet mode
• Remote chirp delete
• Remote sensor bypass
• Passive or active arming
• Stop & Go Feature
• Auto Cold Start
• Flashing parking lights
• Auto Rearm
• Passive/Active Arming

Optional Features

This System has many optional features that may
require additional parts and/or labor. Please contact
your dealer for more details.

• Remote keyless entry (Door lock/unlock)
• Illuminated entry
• LCD FM 2-way Remote
• Hood & trunk protection
• Horn honk
• Trunk/hatch release
• Window roll-up
• Back up battery
• Additional sensors: glass breakage/microwave

Note: Some features may not be appropriate for
certain vehicles. Automatic transmission and
electronic fuel injection are required. on vehicles for
use with this system.

REMOTE TRANSMITTER  FUNCTIONS

Button I Arms the system and locks the
doors*. Button I also activates the Panic
feature.

Button 2 Disarms the system and unlocks the
doors*.

Button 3 Activates the optional Trunk Release
feature*.

Button 4 Activates the Remote Start Feature.

Button 5 Auxiliary Shift Key.

Buttons 5 then 4 Activates the 2nd auxiliary
function.

* Optional Feature

1

Button 1

5-Button

Transmitter

Button 3

Button 2

Button 5
Button 4

Summary of Contents for REMOTE START SECURITY SYSTEM







Reviews: