Instructions for
Page 1
Rev. 120814
Part # BW-1000A
General Guidelines
• It is the user’s responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and practice general safety mea-
sures when using this product.
• Parts and/or instructions are subject to change without notice.
Safety
•
A qualified person should maintain the lift, keeping it in good condition. Keep it clean for best and safest performance.
• The maximum load is 1000 lbs.
DO NOT
exceed this rated capacity.
• Connect the foot-operated air valve to maximum 100psi air supply.
DO NOT
exceed this rated air pressure.
• Use this lift for lifting purposes only.
DO NOT
use it for any other purpose it is not designed to perform.
• Keep children and unauthorized persons away from the work area.
•
Remove loose clothing. Remove ties, watches, rings, and other loose jewelry, and contain long hair.
• Wear ANSI approved safety goggles when operating the lift.
• Do not mount the table when in an elevated position.
• The foot-operated air valve should be at least 3 feet away from the air lift during raising and lowering operation.
•
Only use this lift on a surface that is stable, level, dry, and not slippery, and capable of sustaining the load. Keep the surface
clean, tidy, and free from unrelated materials and ensure that there is adequate lighting.
•
Before lifting a motorcycle, ensure the weight of the motorcycle has been fully supported by the lift platform.
DO NOT put the
rear wheel of the motorcycle on the ramp and DO NOT use the ramp to support the weight of the motorcycle when
lifting.
The ramp is only used to help you wheel the motorcycle onto the platform when the lift is at its lowest position.
• DO NOT
ride a vehicle onto the lift. Ensure the motorcycle is adequately secured to the lifting platform with appropriate
straps before lifting.
• Keep the safety bar (11) in position at all times except when lowering the lift.
•
Before lowering the lift, ensure that there are no obstructions underneath and that all persons are standing clear.
• Always keep your hands and feet away from moving parts.
• The lift must be in the lowered position when moving.
DO NOT
attempt to transport a load on the lift.
• DO NOT
use the lift if damaged, any suspect parts are noted, or it has been subjected to a shock load.
• DO NOT
operate the lift when you are tired or under the influence of alcohol, drugs, or any intoxicating medication.
• DO NOT
allow untrained persons to operate the lift.
• DO NOT
make any modifications to the lift.
• Recommended for indoor use only.
DO NOT
expose the lift to rain, snow, or excessive moisture.
•
If the lift needs repairing and/or there are any parts which need to be replaced, have it repaired by authorized technicians
and only use the replacement parts supplied by the manufacturer.
