1
Add engine lubricant. Refer to page 13 of the
operator’s manual for more details.
BM10680
6800 WATT GENERATOR
Add fuel. Refer to page 13 of the operator’s manual for
more details.
988000-191
6-22-10 (REV:01)
Start the engine. Refer to page 13 of the operator’s
manual for more details.
Unplug all loads from the generator.
Turn the fuel valve to the ON position (
A).
Put the engine switch in the ON position (
B).
Move choke lever right (
C).
Grasp the recoil starter (
D) and pull slowly until
resistance is felt. Give the recoil starter a short, brisk
pull to start the engine or turn the switch key to the
start position (B) and release after the engine starts.
Let engine run for several seconds, then move
choke lever left (
E).
1
2
3
DO NOT RETURN TO THE STORE!
If you have any questions, please call: 1-800-726-5760
or visit our website at www.blackmaxtools.com
Product style and configuration may vary
.
2
Install wheels. Refer to pages 11 and 12 of the
operator’s manual for more details.
Install feet. Refer to page 11 of the operator’s manual
for more details.
1
3
Install handles. Refer to page 12 of the operator’s
manual for more details.
Typical Generator
Shown
Exhaust Port
Pointed away from
dwelling openings
WARNING:
Do not connect to a building’s electri
-
cal system unless the generator and transfer switch have
been properly installed and the electrical output has been
verified by a qualified electrician.
WARNING:
This Quick Start Guide is not a substitute for reading the operator’s manual. To reduce the risk of injury or death, user must read and understand operator’s manual before using this product.
ASSEMBLY GUIDE
QUICK START GUIDE
B
D
A
R
00:00
120V AC
120V AC
00:00
120V AC
120V AC
YAMAHA
OFF
OFF
ON
OFF
CIRCUIT PROCTECTOR
ENGINE SW.
ON
START
OFF
C
E
