background image

clips, coins, keys, nails, screws or other small metal objects that can make a
connection from one terminal to another. 
Shorting the battery terminals together may
cause sparks, burns, or a fire.

• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools,

with sharp cutting edge are less likely to bind and are easier to control.

• Check for misalignment or binding of moving parts, breakage of parts, and any other

condition that may affect the tool’s operation. If damaged, have the tool serviced
before using. 
Many accidents are caused by poorly maintained tools.

• Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may create a risk of injury when used on
another tool.

Service
• Tool service must be performed only by qualified repair personnel. 
Service or

maintenance performed by unqualified personnel may result in a risk of injury.

• When servicing a tool, use only identical replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES

• Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. 
Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
• 

Use extra caution when cutting overhead and pay particular attention to overhead

wires which may be hidden from view. Anticipate the path of falling branches and
debris ahead of time. 

• KEEP HANDS AWAY from cutting area. Never reach underneath the material for any rea-
son. Hold front of saw by grasping the contoured gripping area. Do not insert fingers or thumb
into the vicinity of the reciprocating blade and blade clamp. Do not stabilize the saw by grip-
ping the shoe.
• KEEP BLADES SHARP. Dull blades may cause the saw to swerve or stall under pressure.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other con-

struction activities contains chemicals known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals are:

•  lead from lead-based paints,
•  crystalline silica from bricks and cement and other masonry products, and 
•  arsenic and chromium from chemically-treated lumber. (CCA)

Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals:  work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
The label on your tool may include the following symbols.

V ..........................volts

A..........................amperes

Hz ........................hertz

W ........................watts

min ........................minutes

......................alternating current

......................direct current

no ........................no load speed

..........................Class II Construction

........................earthing terminal

........................safety alert symbol

.../min ..................revolutions or 

reciprocations
per minute

........................lock-on symbol

........................lock-off symbol

........................Quick Release lock-on symbol

BATTERY CAP INFORMATION

Battery storage and carrying caps are provided for use whenever the battery is out of the tool
or charger. Remove cap before placing battery in charger or tool.

WARNING! Do not store or carry battery so that metal objects can contact exposed

battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product
kit boxes, drawers, etc. with loose nails, screws, keys, etc. without battery cap. Without cap
in place, battery could short circuit causing fire or burns or damage to battery.

SAFETY WARNINGS AND INSTRUCTIONS: CHARGING THE SAW

1. This manual contains important safety and operating instructions.
2. Before using battery charger, read all instructions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using battery.

3.

CAUTION: To reduce the risk of injury, charge only Black & Decker Power Packs.

Other types of batteries may burst causing personal injury and damage.

4.   Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold by Black & Decker may result in a risk of

fire, electric shock, or injury to persons.

6. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when dis-

connecting charger.

7. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise sub-

jected to damage or stress.

8. An extension cord should not be used unless absolutely necessary. Use of improper

extension cord could result in a risk of fire, electric shock or electrocution.

a.   Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed

extension cords should be used, and we recommend that they be listed by Underwriters
Laboratories (U.L.). If the extension is to be used outside, the cord must be suitable for
outdoor use. Any cord marked for outdoor use can also be used for indoor work. The let-
ters "W" or "WA" on the cord jacket indicate that the cord is suitable for outdoor use.

b.   An extension cord must have adequate wire size (AWG or American Wire Gauge) for

safety, and to prevent loss of power and overheating. The smaller the gauge number of
the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity than
18 gauge. When using more than one extension to make up the total length, be sure each
extension contains at least the minimum wire size.

CHART FOR MINIMUM WIRE SIZE (AWG)OF EXTENSION CORDS

NAMEPLATE RATING AMPS – 0 – 10.0

Total Extension Cord Length (ft) 

25

50

75

100

125     150

Wire Gauge

18

18

16

16

14       14

9. Use only the supplied charger when charging your saw. The use of any other charger

could damage the battery or create a hazardous condition.

10. Use only one charger when charging.
11. Do not attempt to open the charger or the saw. There are no customer serviceable parts

inside. Return to any authorized Black & Decker service center.

12. DO NOT incinerate the saw or battery packs even if they are severely damaged or com-

pletely worn out. The batteries can explode in a fire.

13. A small leakage of liquid from the battery cells may occur under extreme usage, charg-

ing or temperature conditions. This does not indicate a failure. However, if the outer seal
is broken and this leakage gets on your skin:

a. Wash quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or vinegar.
c. If the battery liquid gets in your eyes, flush them with clean water for a minimum of 10

minutes and seek immediate medical attention. MEDICAL NOTE: The liquid is a 25-35%
solution of potassium hydroxide.

CAT. NO. CRS180B    FORM NO. 609746-00   PRINTED IN CHINA Copyright©2002 Black & Decker  (DEC - 02)

1-800-54-HOW-TO

BEFORE RETURNING THIS PRODUCT 

FOR ANY REASON PLEASE CALL

IF YOU SHOULD EXPERIENCE A PROBLEM

WITH YOUR BLACK & DECKER PURCHASE,

CALL 1-800-54-HOW-TO (1-800-544-6986).

IN MOST CASES, A BLACK & DECKER REPRESENTATIVE

CAN RESOLVE YOUR PROBLEM OVER THE PHONE.

IF YOU HAVE A SUGGESTION OR COMMENT,

GIVE US A CALL. YOUR FEEDBACK IS VITAL

TO THE SUCCESS OF BLACK & DECKER’S QUALITY 

IMPROVEMENT PROGRAM.

(544-6986)

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO. 

CATALOG NUMBER

CRS180B 

INSTRUCTION

MANUAL

GENERAL SAFETY RULES - FOR ALL BATTERY OPERATED TOOLS

WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below, may result in electric shock, fire and/or seri-

ous personal injury.

SAVE THESE INSTRUCTIONS

Work Area
• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or
fumes.

• Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.

Electrical Safety
• Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from

heat, oil, sharp edges or moving parts. Replace damaged cords immediately.
Damaged cords may create a fire.

• A battery operated tool with integral batteries or a separate battery pack must be

recharged only with the specified charger for the battery. A charger that may be suitable
for one type of battery may create a risk of fire when used with another battery.

• Use battery operated tool only with specifically designated battery pack. Use of any

other batteries may create a risk of fire.

Personal Safety
• Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use tool while tired or under the influence of drugs, alcohol, or
medication. 
A moment of inattention while operating power tools may result in serious
personal injury,

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your

hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair
can be caught in moving parts.

• Avoid accidental starting. Be sure switch is in the locked or off position before

inserting battery pack. Carrying tools with your finger on the switch or inserting the battery
pack into a tool with the  switch on invites accidents.

• Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is

left attached to a rotating part of the tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. Proper footing and

balance enable better control of the tool in unexpected situations.

• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,

hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care
• Use clamps or other practical way to secure and support the workpiece to a stable

platform. Holding the work by hand or against your body is unstable and may lead to loss of
control.

• Do not force tool. Use the correct tool for your application. The correct tool will do the

job better and safer at the rate for which it is designed.

• Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the

switch is dangerous and must be repaired.

• Disconnect battery pack from  tool or place the switch in the locked or off position

before making any adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce the risk of starting the tool accidentally.

• Store idle tools out of reach of children and other untrained persons. Tools are

dangerous in the hands of untrained users.

 

other metal objects like: paper

H I G H   P E R F O R M A N C E   C O R D L E S S   T O O L S

1

1

1

1

8

8

8

8

  

  

V

V

V

V

o

o

o

o

ll

ll

tt

tt

  

  

C

C

C

C

o

o

o

o

rr

rr

d

d

d

d

ll

ll

e

e

e

e

s

s

s

s

s

s

s

s

  

  

R

R

R

R

e

e

e

e

c

c

c

c

ii

ii

p

p

p

p

rr

rr

o

o

o

o

c

c

c

c

a

a

a

a

tt

tt

ii

ii

n

n

n

n

g

g

g

g

  

  

S

S

S

S

a

a

a

a

w

w

w

w

Battery Cap

K

K

K

K

E

E

E

E

Y

Y

Y

Y

II

II

N

N

N

N

F

F

F

F

O

O

O

O

R

R

R

R

M

M

M

M

A

A

A

A

T

T

T

T

II

II

O

O

O

O

N

N

N

N

Y

Y

Y

Y

O

O

O

O

U

U

U

U

S

S

S

S

H

H

H

H

O

O

O

O

U

U

U

U

L

L

L

L

D

D

D

D

K

K

K

K

N

N

N

N

O

O

O

O

W

W

W

W

::

::

• Keep shoe firmly against work surface.

• Charge battery for 9 hours before first use. For more information see 

“CHARGING

THE POWER PACK”.

 

 

 

Summary of Contents for FIRESTORM CRS180B

Page 1: ... may result in serious personal injury Dress properly Do not wear loose clothing or jewelry Contain long hair Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Avoid accidental starting Be sure switch is in the locked or off position before inserting battery pack Carrying tools with your finger on the switch or inserting the ...

Page 2: ... battery in charger or tool WARNING Do not store or carry battery so that metal objects can contact exposed battery terminals For example do not place battery in aprons pockets tool boxes product kit boxes drawers etc with loose nails screws keys etc without battery cap Without cap in place battery could short circuit causing fire or burns or damage to battery SAFETY WARNINGS AND INSTRUCTIONS CHAR...

Page 3: ...icantly reduce overall power pack life 7 When the battery is inserted into the charger the red Charging Indicator light will come on indicating that there is contact between the battery and charger The light will stay on as long as the battery is in the charger and the charger is plugged into a working outlet It WILL NOT flash go out or change to a different color when the charging cycle is comple...

Page 4: ...aged during use During operation some longer blades may vibrate or shake if the saw is not kept in contact with the workpiece Recommended accessories for use with your tool are available from your local dealer or authorized service center If you need assistance regarding accessories please call 1 800 54 HOW TO 800 544 6986 WARNING The use of any accessory not recommended for use with this tool cou...

Reviews: