QUICK START GUIDE
1844, 1842, 2290 SERIES
Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
161-3727 11/17 RevB
9.
With the base unit and reservoir
on a table, extend the hose
and nozzle to the mat or towel
on floor and spray trigger until
solution dispenses.
8.
Set Rinse/Shampoo switch to
desired setting. For Shampoo, the
reservoir will dispense a mixture
of shampoo and water; for Rinse,
it will dispense just water.
7.
Hold the tool horizontally on a flat surface (such as table or counter
top) and attach it to the cleaner by inserting the flex hose connector into
the shampoo tool connector. You will hear a “click” when it locks in place.
4. Get ready to prime the system.
Fill the base unit clean water tank
with warm-to-the-touch tap water
to the fill line.
3.
Insert screw and tighten with a
screwdriver.
5.
With the unit elevated on a
table, turn unit ON and press flex
hose trigger until water dispenses
onto the mat on the floor.
2.
Slide the lower plate of the
flex hose storage bracket into the
opening on the back of the unit.
Make sure the screw hole lines up.
1.
Slide the back plate of the flex
hose clip into the opening on the
front of the unit. You will hear a
“click” when it is locked in place.
6.
Hold tool right side up and add
BISSELL No-Rinse Dog Shampoo
to the shampoo reservoir.
BARK
BATH
PORTABLE DOG BATH
click
