1
P A R T S L I S T
Item
Qty
Description
Item
Qty
Description
A
1
Front Frame
H
2
3/8”
x 1
1/2”
Hex Bolt
B
1
Ladder Frame
I
2
3/8”
x
1”
Hex Bolt
C
1
Platform
J
4
3/8”
Lock Nut
D
2
Wheels
K
2
Plastic Washer
E
2
5/16”
x
3”
Hex Bolt
L
Set
VB75P Padding
F
2
5/16”
Jam Nut
M
3
12”
Slip Resistant Stair Tread Tape
G
2
5/16”
Lock Nut
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
Read all instructions before proceeding.
——
Instruction Manual ——
VB76
Freestanding Folding Officials Platform
Date: 12/14/2017 Rev: 4 B.A. N.J.C. File: \ I:\Publisher\Instructions\volleyball Ref#: 960550
Warning!
•
The factory installed safety pin must be fully inserted and secured with the retaining wire prior
to use. Check this connection each time the judges stand is used, failure to use the safety pin
could cause judges platform to collapse causing serious injury.
•
Make are all safety padding is in place prior to play to reduce the chance of injuries.
•
Maximum allowable load is 250 pounds
Customer Service
(800) 247
-
7668
1.
Use the
3/8”
X 1
1/2”
Hex Bolts
(H),
Plastic Washers
(K) and
3/8”
Lock Nuts
(J) to attach
Ladder Frame
(B) to
Front Frame
(A) making sure
Plastic Washer
(K) is positioned between
Ladder Frame
(B) and
Front Frame
(A). See Page 2, Figure 1.
2.
Use the
3/8”
X
1”
Hex Bolts
(I) and
3/8”
Lock Nuts
(J) to install
Platform
(C) to the
Front Frame
(A). See Page 2, Figure 1.
3.
Use the
5/16”
X
3”
Hex Bolts
(E),
5/16”
Jam Nuts
(F) and
5/16”
Lock Nuts
(G) to attach
Wheels
(D) to
Ladder Frame
(B). See Page 1, Figure 1.
4.
Install VB75P Padding Set (L) by removing the vinyl wrap, install foam tubes around the judges
stand and replacing vinyl wrap around the foam tubes using the sewn in Velcro to secure
padding in place. See Page 2, Figure 2.
5.
Install
12”
Slip Resistant Stair Tread Tape
(M), centered on each step on the ladder frame.
See Page 2, Figure 1.
