background image

P

P

P

4

4

4

T

T

T

G

G

G

V

V

V

 

 

 

 

i

FCC Statement and Copyright 

 

This equipment has been tested and found to comply with the limits of a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. There is no guarantee that interference will not occur in a 
particular installation. 
 
The vendor makes no representations or warranties with respect to the 
contents here of and specially disclaims any implied warranties of 
merchantability or fitness for any purpose. Further the vendor reserves the 
right to revise this publication and to make changes to the contents here of 
without obligation to notify any party beforehand. 
Duplication of this publication, in part or in whole is not allowed without 
first obtaining the vendor’s approval in writing. 
 
The content of this user’s is subject to be changed without notice and we 
will not be responsible for any mistakes found in this user’s manual. All the 
brand and product names are trademarks of their respective companies. 
 
 

 
 
 
 
 
 
 
 
 

 

 

Summary of Contents for P4 TGV



































Reviews: