AA1600M AIR-AssIst
AIRLEss spRAy Gun
(0909-1600-XXXXXX)
(WItH FLAt tIp/tWIst tIp OptIOn,
FAn sIZE ADJustMEnt FEAtuRE AnD
HVLp/LVMp tECHnOLOGy)
Part
Sheet
77-2921R-9
The following instructions
provide the necessary
information for the proper
operation and preventive
maintenance of the Binks
AA1600M Air-Assist Airless
Spray Gun. Please read and
understand all information in this
document in order to get the
maximum performance from
your new AA1600M spray gun.
In the AA1600M spray gun, the
paint or other material to be
sprayed is pre-atomized and
forced through the carbide tip by
the typical 400-800 psi fluid
pressure (with capabilities up to
1,600 psi/110 bar). As a result of
the pre-atomizing, the final
shaping air supplied by the air
cap produces an exceptionally
fine and even spray pattern. The
result of this spray pattern is an
even finish that lends itself to
products that need an
exceptionally fine finish with
reduced overspray and VOC
emissions.
Replaces
Part Sheet
77-2921R-8
II 2 G X
SPecIfIcatIonS:
Maximum
Fluid Pressure:
1600 psi/110 bar
Maximum
Air Pressure:
100 psi/6.8 bar
Gun Body:
Forged Aluminum
Fluid Path:
Stainless Steel
Fluid Seat:
UHMW (Tungsten Carbide optional)
Fluid Inlet Size:
1/4" NPS(m) Thread
Air Inlet Size:
1/4" NPS(m) Thread
Gun Weight:
17.28 oz./490 g
(without Tip, Aircap, Guard)
READ ALL InstRuCtIOns BEFORE OpERAtInG tHIs BInKs pRODuCt
IMpORtAnt!
Do not DeStRoY
It is the customer's responsibility to have
all operators and service personnel read
and understand this manual.
contact your local Binks representative
for additional copies of this manual.
English: Pages 1 – 12
Español: Páginas S-1 – S-12
Français: Pages F-1 – F-12
PRoP 65 WaRnInG
WARNING: This product
contains chemicals known
to the State of California
to cause cancer and birth
defects or other
reproductive harm.
