77-3049-R3 (4/2018)
1 / 20
www.carlisleft.com
READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT.
IMPORTANT! DO NOT DESTROY
It is the customer's responsibility to have all operators and service personnel read and understand this
manual. Contact your local Binks representative for additional copies of this manual.
The Trophy HVLP Series of Spray Guns can be used to operate at high transfer efficiencies in
compliance with “California South Coast Air Quality Management District” regulations as a
High Volume, Low Pressure spray gun.
Binks Trophy Series Automatic Spray Gun is the premier
spray gun for use in automatic spray applications,
incorporating some of the best features of our Trophy
hand spray gun. Trophy Automatic gun offers total control
of atomizing air pressure, side port air, fluid flow, and
spray patterns in high and low production settings. Latest
advancements in atomization technology have been
incorporated for achieving consistent, fine finishes when
spraying a wide range of industrial coatings.
All product contact surfaces are manufactured from FDA
acceptable materials when using a 45-11050-XX,
45-11060-XX series fluid nozzle and a 47-6860, 47-6864,
47-6865, 47-6866 needle.
Binks Trophy Automatic Series Spray Guns can be used
with pressure pots and pumps.
Binks Trophy Series Spray Guns are offered in three
different atomization technologies: HVLP, LVMP and
Conventional.
SPECIFICATIONS
Maximum Air Pressure
140 psi / 9.6 bar (P-1)
Maximum Fluid Pressure
140 psi / 9.6 bar (P-2)
Gun Body
Anodized Aluminum
Cylinder Air Pressure to
Operate the Gun
65 psi / 4.5 bar
Fluid Path
Stainless Steel
Fluid Inlet Size
3/8" NPS / BSP(m)
Air Inlet Size
1/4" NPS / BSP(m)
Gun Weight
20.8 oz. / 590 grams
Wetted Parts
Stainless Steel &
UHMWPE
Gun Mounting Hole
1/2” diameter
II 2 G X
EN
SERVICE MANUAL
“TROPHY” SERIES AUTOMATIC SPRAY GUNS
HVLP, LVMP & CONVENTIONAL (3465-XXXX-XXXX)
