manualshive.com logo in svg

Big Backyard F23100, Installation And Operating Instructions Manual

The Big Backyard F23100 is a versatile and durable outdoor playset perfect for kids of all ages. Get the most out of your purchase by downloading the free Installation and Operating Instructions Manual from manualshive.com. Easily assemble and maintain your playset with this comprehensive manual at your fingertips.

Share
Download
background image

INSTALLATION AND OPERATING INSTRUCTIONS

STONEYBROOK LODGE PLAY SYSTEM – F23100

10 - 14 Hrs

To reduce the risk of serious injury or death, you must read and 

follow these instructions. Keep and refer to these instructions 

often and give them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 32’3” x 28’ (9.8 x 8.5 m) area requires Protective Surfacing. See page 3. 
MAXIMUM VERTICAL FALL HEIGHT - 7’6” ft. (2.3 m)
CAPACITY - 12 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries,  

day cares or parks

Rev 12/29/2010

3403100

Two person

assembly

Table of Contents

Warnings and Safe Play Instructions  . . . . . . . . . . pg. 2
Protective Surfacing Guidelines  . . . . . . . . . . . . . . pg. 3
Instructions for Proper Maintenance  . . . . . . . . . . pg. 4
About Our Wood – Limited Warranty . . . . . . . . . . pg. 5
Keys to Assembly Success . . . . . . . . . . . . . . . . . . pg. 6
Part ID  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 7
Installation of I.D./Warning Plaque . . . . . . . . Final Step

WARNING

 

18’ 8” (5.7 m)

14’
 5”
 (4.4

 m)

Solowave Design 
375 Sligo Rd. West, PO Box 10
Mount Forest, ON Canada  N0G 2L1
General Inquiries:
8:00am - 4:30pm EST
Toll Free: 1-877-966-3738
[email protected]

Summary of Contents for F23100









































































Reviews:

No comments

Related manuals for F23100

TP active fun FoldAway TP913 Instructions For Assembly, Maintenance And Safe Use preview
FoldAway TP913
Brand: TP active fun Pages: 28
Kettler Gondel 08376-910 User Manual preview
Gondel 08376-910
Brand: Kettler Pages: 10
Jamara Grow With Me 3in1 Instructions Manual preview
Grow With Me 3in1
Brand: Jamara Pages: 12
Backyard Discovery Tucson 65411 Owner'S Manual preview
Tucson 65411
Brand: Backyard Discovery Pages: 49
4MOMS mamaRoo 4m-005 Instruction Manual preview
mamaRoo 4m-005
Brand: 4MOMS Pages: 29
4MOMS mamaRoo Instruction Manual preview
mamaRoo
Brand: 4MOMS Pages: 59
Outsunny 84A-081 Quick Start Manual preview
84A-081
Brand: Outsunny Pages: 4
Evenflo ExerSaucer Safari Friends Instructions Manual preview
ExerSaucer Safari Friends
Brand: Evenflo Pages: 28
active fun TP131 Instructions For Assembly Maintenance And Use preview
TP131
Brand: active fun Pages: 16

Brands by name

Popular brands

Load more brands