Note. Before connecting the equipment, it is recommended that you read the instruction manual carefully and keep it for future
reference.
It is also recommended to perform the electrical connections correctly as per enclosed drawings, observing the instructions
and the Standards.
Belonging to
Switching power supply ASI012
Rev. 1
Installation
and user guide
Indispensable power supply for the addressed system
The switching power supply ASI012 is born to complete the addressed gas leak detection system
this power supply is used to provide a 15VDC electrical voltage to feed 8 gas sensors
A series of courtesy terminals have been added for a possible RS-485 MODBUS Network connection.
+
+
output output
15VDC 15VDC
input
230VAC
A B C
A B C
Bus in Bus out
+
+
output output
15VDC 15VDC
input
230VAC
A B C
A B C
Bus in Bus out
S10
S11
BXI32
Line RS 485 - Max 1000m
Serial line connection between two ASI012
Switching power supply technical features
ASI012
110÷230 VAC - 12 VDC - 30 Wat
Power supply for 8 sensors
Note: each sensor absorbs 200 mA
INSTALL IN SAFE AREA, NO
ATEX
Channel: Beinat gas solutions
Electric connections also available on
