Verison:201905
User Information
Model number: B702/ B702V/ B704/ B704V (FFP2 NR)
Important:
The filtering half masks have been designed to meet the requirements of REGULATION (EU)
2016/425 and harmonies standard EN149:2001+A1:2009.
This single use respirators are designed to protect against solid and liquid aerosols. The filtering half
masks are classified as FFP2 NR.
Before using these masks reading the user information and check the classification to which
respirator belongs on the packaging.
Applications:
FFP2 NR filtering half masks are intended use to protect the user against non-toxic solid and liquid
aerosols, as according filtering efficiency (Max. 8%) and their maximum total inward leakage (Max.
11%)
Fitting Instructions:
Hold the respirator in hand with the nosepiece at your fingertips. Allow the headbands hang
freely below hand.
Cup the respirator firmly against your face with the nosepiece on the bridge of your nose.
Stretch and pull the lower headband over the head and position below your ears. Stretch and
pull the top headband on the back of your head above your ears. Press soft nosepiece to
confirm snugly around the nose.
To test fit for respirator without exhalation valve, cup both hands over the respirator and
exhale vigorously.
To test fit for respirator with exhalation valve; cup both hands over the respirator and inhale
sharply.
A negative pressure should be felt inside of respirator if air flows around your nose, tighten the
nosepiece. If air leaks around the edges, reposition the headband for better fitting.
Change respirator immediately if breathing becomes difficult or respirator become damaged or
distorted or a proper face fit can not be maintained. Careful observance of these instructions is
an important step in safe respirator use.
Warning:
1.
Failure to following all instructions and limitations on the use of the product could reduce the
effectiveness of respirator and result in sickness or death.
2.
A properly selected respirator is essential to protect your health, before using this respirator,
consult an industrial hygienist or occupational safety professional to determine the suit ability
