![background image](http://html.mh-extra.com/html/bea/lo-21u/lo-21u_user-manual_2716039001.webp)
75.1041.08 LO21U 20150708
Page 1 of 5
PRODUCT
DESCRIPTION
TECHNICAL
SPECIFICATIONS
USERS GUIDE
LO-21U
LOCKOUT RELAY
SAFETY
PRECAUTIONS
The LO-21U (PN: 10LO21U) is a micro-processed lock out module designed to operate on swing door applications with
BEA’s Bodyguard or DK-12 overhead presence sensor. The LO-21U interprets door open or door closed position based
upon motor voltage input. The motor voltage information is sent from the LO-21U to the Bodyguard or DK-12 via data lines.
The LO-21U provides optional safety beam input (dry contacts) to override the inhibit signal during closing.
DESCRIPTION
SPECIFICATION
Supply voltage
12 to 24 VAC / 15 to 24 VDC
Operating frequency
4 MHz (Microprocessor)
Power consumption
10 mA at rest, 50 mA Maximum
Output
(2) SPST Relays
Maximum voltage – Relay contacts
60 VDC, 120 VAC
Maximum current – Relay contacts
2A DC, 0.5 A AC
•
Shut off all power going to the header before attempting any wiring procedures.
•
Maintain a clean & safe environment when working in public areas.
•
Constantly be aware of pedestrian traffic around the door area.
•
Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected
reactions by the door.
•
Always check placement of all wiring before powering up to insure that moving door parts will not catch any
wires and cause damage to equipment.
•
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of installation.
COMPONENT ID
Green LED Dipswitches
Red LED
OBSOLETE