BC BOOSTER K10000 PRO
OPERATION GUIDE
Thank you for choosing BC BOOSTER K10000 PRO! Please always follow
all basic safety precautions and norms when using electrical appliances, read
all instructions carefully, please keep this instruction manual for easy
reference.
CONTENT OF THE PACKAGE
1.
12V/24V Jump Starter BC BOOSTER K10000 PRO
2.
Dual Connector for 12/24V Jump Start
3.
Insulated clamps for jump starting with fuse
4.
Home Adapter to charge the device from a power outlet socket
5.
Car Adapter to charge the device from a 12V cigar socket
6.
USB multiple adapter to charge electronic devices
7.
OBD Adapter for memory saving (OPTIONAL)
8.
User manual
LED POWER INDICATOR - CHECK THE STATE OF CHARGE OF BC BOOSTER K10000 PRO
To check the state of charger of the jump starter, please slide the " ON/OFF Switch" to position "ON" and press the LED Power Indicator Switch. Different
number of solid indicators show different charge level: 1 LED: 20% / 2 LEDs: 40% / 3 LEDs: 60% / 4 LEDs: 80% / 5 LEDs: 100%.
HOW TO CHARGE BC BOOSTER K10000 PRO
WARNING! CARRY OUT A FULL CHARGE STRAIGHT AFTER PURCHASING IT, AFTER EACH USE AND ALWAYS EVERY 3 MONTHS.
1.
Slide the "ON/OFF Switch" to position "ON".
2.
Connect the Home Adapter to the jump starter’s 12/24V 2A Input.
3.
Insert the AC adapter into a power outlet. The LEDs on the state-of-charge indicator flash in sequence.
4.
When the charge is over, all 5 LEDs on the state-of-charge indicator turn on and the charging process interrupts automatically. Disconnect the
Home Adapter from the power outlet and then from the jump starter. Turn off the device sliding the "ON/OFF Switch" to position "OFF".
Or
1.
Slide the "ON/OFF Switch" to position "ON".
2.
Connect the Car Adapter to the jump starter’s 12/24V 2A Input.
3.
Insert the adapter into a 12V cigar lighter socket. The LEDs on the state-of-charge indicator flash in sequence.
4.
When the charge is over, all 5 LEDs on the state-of-charge indicator turn on and the charging process interrupts automatically. Disconnect the Car
Adapter from the 12V socket and then from the jump starter. Turn off the device sliding the "ON/OFF Switch" to position "OFF".
HOW TO JUMP START A VEHICLE PROVIDED WITH A 12V OR 24V BATTERY
WARNING! DO NOT JUMP START THE VEHICLE WHEN THE DEVICE IS BEING CHARGED!
MAKE SURE THAT THE IGNITION KEY OF THE VEHICLE IS IN THE “OFF” POSITION BEFORE CONNECTING THE JUMP STARTER!
USE THE DEVICE ONLY WITH VEHICLES WITH 12V OR 24V SYSTEM!
In order to jump start a gasoline or diesel vehicle, please execute the following procedure:
1.
Turn on the device sliding the "ON/OFF Switch" to position "ON".
2.
Press the LED Power Indicator Switch and check that at least 3 LEDs are on. If not, fully charge the jump starter (100%) before using it. If
the first indicator lights up with red and blue lights at the same time, the jump starter might be deeply discharged.
3.
Slide the "ON/OFF Switch" to position "OFF".
4.
Connect the RED clamp to the positive terminal (+) and the BLACK clamp to the negative terminal (-) of the vehicle’s battery
5.
Once you connected the clamps to the battery, choose the correct connector for 12V vehicles (BLACK adapter) or 24V vehicles (RED
adapter), then plug the connector into the 12/24V Jump Start Output and connect the jump starter clamps.
6.
Start the vehicle (turn off all the electronic devices before starting it).
7.
As soon as the vehicle is turned on (within 15/20 seconds), disconnect the clamps from the jump starter and then disconnect the clamps
from the battery. Avoid running the engine over 2500 RPMs when the jump starter is connected.
8.
During the jumpstart, due to the voltage drop, the number of LEDs on might drop down to 1 or the LED bar might turn off. It is a normal
situation, please turn on the device and push the LED Power Indicator Switch again to display the jump starter state of charge.
9.
WARNING!!! ALWAYS WAIT AT LEAST 20 SECONDS
BETWEEN AN IGNITION AND THE NEXT ONE WHEN STARTING
A MOTORCYCLE, 30 SECONDS WHEN STARTING A CAR!
NB: In case of < 0°C temperature, the cranking performance of the booster can
decrease sharply. After some attempts, the product gets warm and its
performance improves. Otherwise, put the product in a warmer place before
using it.
WARNING!!! IT IS MANDATORY TO WAIT 30 SECONDS BEFORE
MAKING ANOTHER ATTEMPT TO START THE VEHICLE!
DISCONNECT THE JUMP STARTER WITHIN 15/20 SECONDS
AFTER THE ENGINE CRANKING, TO AVOID DAM AGING THE
INTERNAL BATTERY.
AFTER 3 FAILED ATTEMPTS TO START THE VEHICLE, DO NOT
TRY AGAIN.
PLEASE DO NOT RUN THE ENGINE OVER 2500 RPM
BEFORE DISCONNECTING THE DEVICE.
Front LED Light
Switch
5V 2.1A
USB Output
Front LED
Light
5V 1A USB Output
LED Power Indicator Switch
LED Power Indicator
12/24V 2A Input
ON/OFF
Switch
Side LED
Light Switch
Side LED
Light
Fuse (10A) for
the 12V Socket
12V 10A Output
(Cigar Socket)
12/24V Jump
Start Output
2
3
6
WARNING!!! ALWAYS CONNECT THE CLAMPS FIRST TO THE
BATTERY (RED CLAMP TO THE POSITIVE POLE, BLACK CLAMP TO
THE NEGATIVE POLE) AND THEN TO THE JUMP STARTER!
