background image

BAYCO • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • www.baycoproducts.com 

 
 
 

Instructions for Models 506-507-520-550 and 906-907-935-

936

 

13 Watt Fluorescent Work Lights 

INS-506-12 
 
Electrical Rating - All models use 125 Volts 60 Hz 
 
CAUTION
 – 506-507-520-550 TO REDUCE THE RISK OF ELECTRIC SHOCK AND 
FIRE - PULL PLUG WHEN SERVICING, OR WHEN RE-LAMPING - USE ONLY 13 
WATT OR SMALLER BULB 
 
CAUTION – 906-907-935-936 TO REDUCE THE RISK OF ELECTRIC SHOCK AND 
FIRE - PULL PLUG WHEN SERVICING, CONNECTING/DISCONNECTING FROM THE 
LAMP OR WHEN RE-LAMPING - USE ONLY 13 WATT OR SMALLER BULB 
 
CAUTION 
DO NOT use in explosive atmospheres, near flammable liquids, or where explosion proof 
lamps are required.  
DO NOT use in the proximity of vehicles or equipment when there is a risk of flammable 
liquids coming into contact with the hand lamp 
DO NOT immerse in water 
DO NOT use in areas where water can accumulate or in rain or  mist                      
CAUTION: Risk of Electric Shock – For Light Duty Dry Location Use Only 
 
IMPORTANT SAFETY INSTRUCTIONS 506-507-520-550 
This product has a polarized plug (one blade is wider than the other).  As a safety feature, this 
plug will fit in a polarized outlet only one way.  If the plug does not fit fully in the outlet, reverse 
the plug.  If it still does not fit, contact a qualified electrician.  Never use with an extension cord 
unless the plug can be fully inserted. Do not attempt to defeat this safety feature. 
 
IMPORTANT SAFETY INSTRUCTIONS 906-907-935-936 
This product has a 3 prong polarized plug on the power cord. Do not attempt to bypass 
this safety feature by removing the round plug and defeat his safety feature. This plug will 
fit into a grounded outlet only one way. If the plug does not fit fully into the outlet, contact 
a qualified electrician. Never use with a two wire extension cord 
 
WARNING: NOT FOR USE IN HAZARDOUS LOCATIONS 
CAUTION: DO NOT USE IN HAZARDOUS LOCATIONS AS REQUIRED BY THE 
CANADIAN ELECTRICAL CODE, PART I 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

 
 

OPERATION 

Plug into 120 Volt 60 Hz polarized outlet. Notice the polarized plug and insert properly. 
Operate switch. Lamp may flash several times before lighting. 
 

BULB  REPLACEMENT

 

1.

 

Disconnect the unit from Electrical Outlet. 

2.

 

Use the edge of a knife blade to lift out the 2 plastic studs in the base of the bulb 
holder. 

3.

 

Carefully pull the tube from around the bulb-holder. The bulb will remain in the 
socket. 

4.

 

Carefully pull straight out on bulb to remove and discard the old bulb. 

5.

 

Insert new bulb in socket in bulb holder. Be sure bulb is properly seated against 
the bulb-holder. 

6.

 

Slide the tube assembly over the bulb and insert top of bulb into the oval slot in the 
top of the bulb holder. Bulb should just penetrate slot. 

7.

 

Align the holes in the tube with the holes in the bulb-holder handle and install both 
plastic rivets. Press firmly until seated. 

8.

 

Restore power connection and test lamp by pressing the power switch.  

 
NOTE: Even new lamps will flash several times before lighting. 
 

 REPLACEMENT BULBS

 

Use PL-13 twin-tube fluorescent bulb. 
A replacement lamp may be obtained from Bayco products. 
 

WARRANTY 

PRODUCTS COVERED UNDER THIS LIMITED WARRANTY: 
This product is warranted to the original purchaser for 1 year and only covers failures due 
to defects in materials or workmanship. If this product is used for rental purposes, the 
warranty term is reduced to 90 days from the date of purchase. 
 
NOT COVERED 
The warranty does not cover normal wear and tear or cosmetic damage. The Limited 
Warranty also does not cover damages which occurred in shipment or failures which are 
caused by accidents, misuse, abuse, faulty installation and lightning damage. 
Consequential damages, incidental damages or incidental expenses, including damage 
to property. Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may not apply to you. This 
warranty gives you specific legal rights, which may vary from state to state. 
This warranty does not apply to certain Bayco professional products that carry a specific 
warranty unique to those products. 
 
WARRANTY CLAIMS - USA 
Contact Bayco for USA warranty claims. Call 800-233-2155 and Bayco Customer 
Service will provide a Return Goods Authorization (RGA) to facilitate rapid warranty 
action. After receiving the RGA, send the product (shipping prepaid) to BAYCO • 640 S. 
SANDEN BLVD • WYLIE, TEXAS • 75098. Include a dated proof of purchase and a brief 
description of the defect with your name, address and phone number. Your product will 
either be repaired or replaced at the option of Bayco and returned as soon as practical, 
but no later than 45 days after being received by Bayco. 
 
WARRANTY CLAIMS - CANADA 
Return the product to the place where purchased with a dated proof of purchase and a 
brief description of the defect with your name, address and phone number. Your product 
will either be replaced or purchase price refunded. 
 
REQUEST FOR WARRANTY ACTION 
If you have any questions about this warranty or any other Bayco product inquiries 
contact BAYCO • 640 S. SANDEN BLVD • WYLIE, TEXAS • 75098 or call 800-233-2155 

 
 
 
 
 

Instructions Pour les Modèles 506-507-520-550 & 906-907-935-

936

 

13 Watt Lampes de Travail Fluorescente 

 

Caractéristiques électriques - Tous les modèles utilisent 125 volts 60 Hz 
 

ATTENTION -506-507-520-550 POUR REDUIRE LE RISQUE DE CHOC ÉLECTRIQUE 
ET INCENDIE - RETIRER LE BOUCHON LORS DE L'ENTRETIEN OU QUAND 
REMPLACEMENT DES LAMPES - UTILISER SEULEMENT 13 WATTS OU MOINS 
AMPOULE 
 
ATTENTION –
 906-907-935-936 POUR REDUIRE LE RISQUE DE CHOC 
ÉLECTRIQUE ET INCENDIE - RETIRER LE BOUCHON LORS DE L'ENTRETIEN, 
CONNEXION / DECONNEXION DE LA LAMPE OU QUAND REMPLACEMENT DES 
LAMPES - UTILISER SEULEMENT 13 WATTS OU MOINS AMPOULE

 

 
ATTENTION 

NE PAS utiliser dans des atmosphères explosives, près de liquides inflammables, ou 
lorsque des lampes antidéflagrantes sont nécessaires. 

NE PAS utiliser à proximité de véhicules ou d'équipement quand il ya un risque de 
liquides inflammables entrent en contact avec la lampe de poche 
Ne pas plonger dans l'eau 
NE PAS utiliser dans les zones où l'eau peut s'accumuler ou dans la pluie ou le brouillard 
ATTENTION: Risque de choc électrique - Pour la lumière endroit sec Duty Utilisez 

506-507-520-550 

906-907-935-936 

Reviews: