265
m
m
/1
0.
43
”
163
m
m
/6
.4
2
”
Ai
r
tab
le
b
a
se
1
Identification of the parts
(product number: 638-xx, 639-xx)
a. base plate
b. aluminium tube (portrait version or landscape version)
c. front plate
d. 6 x Phillips M3x10 screws (for mounting the table base)
e. 4 x Phillips M6x8 screws (for mounting the Eve frame on the
table base)
2
Mounting the table base
Mount the base plate on the tube using four Phillips M3 screws
as shown in drawing 2.
3
Mount the front plate with two Phillips M3 screws, as shown in
drawing 3. (always use the horizontal holes)
4
Standard USB cable
(not included)
Take the standard lightning USB cable, supplied with the iPad
and pull it through the tube following the cable notch as shown
in drawing 4.
Dimensions
Portrait version:
265 mm/10.43” x 173 mm/6.81” x 173 mm/6.81”
Landscape version:
163 mm/6.42” x 173 mm/6.81” x 173 mm/6.81”
173 mm/6.81”
173 mm/6.81”
5
Installing the Eve Air frame
(not included )
Screw (with the four Phillips M6 screws) the Eve frame onto the
front plate, taking into account the position of the frame (2).
Ensure the screws are positioned correctly, so they cannot
damage the iPad.
6
Mounting the iPad
1. Plug the power connector into the iPad.
Portrait version
Made in Belgium
Landscape version
2. Place the iPad sideways in the small lip according to
the drawing (6).
3. Gently push the iPad in the frame so that it is held by
the magnets.
4. Mount the Eve cover but ensure that the cover is not
squeezing the power cable.
Basalte is a registered trademark of Basalte bvba.
Eve is a registered trademark of Basalte bvba.
Eve, Eve Air, Eve mini and Eve touch are registered designs of
Basalte bvba.
iPad, iPad Air, iPad mini, iPad mini Retina and iPod touch are
registered trademarks of Apple Inc.
Puck Power supply
(not included - product number: 610-01)
Install the puck in the wall box following the instructions of the
puck manual. Connect the iPad to the puck, using the Lightning
cable supplied with the iPad.
7
Removing the iPad
1. Remove the Eve cover.
2. Place one finger behind the iPad and another one on
the iPad as shown in the drawing (7).
3. Gently pull the iPad out of the frame making sure it
cannot fall.
4. Remove the power connector.
Basalte bvba
Hundelgemsesteenweg 1a
9820 Merelbeke
Belgium
tel +32 9 385 78 38
fax +32 9 329 66 95
[email protected]
www.basalte.be
v1.0
©
2014 basalte
ACHTUNG
: Die Basalte Eve Air
Tablet Halterung
ist
nicht im Lieferumfang
enthalten. Das Cover muss zusätzlich zum Standfuß bestellt werden!
