P/N: 0024-9513
Revision 0
February 23, 2016
COMBUSTION GAS ANALYZER
QUICK START GUIDE
PREPARE
CONFIGURE
MAINTAIN
Review functions and locations of
key components (1 through 20)
Connect the probe (14 to 11, and
15 to 13)
Turn on the instrument (9)
Verify power (1)
Access and navigate the menus
Replace sensors as needed
1 Display with backlight
2 Function keys
3-6 Navigation keys
7 Enter key
8 Escape key
9 Power/backlight key
10 Run/hold key
11 T-Stack port
12 USB port
13 Sample gas port
14 Sample gas
thermocouple (T-Stack)
connector
15 Sample gas hose
16 USB cable (Optional)
17 Location of optional
NOx filter
18 Water trap and
filter assembly
19 Probe handle
20 Probe tube
Select fuel type
Use default configuration values or
navigate to Setup Menu to set
combustion test parameters
Calibrate as needed
Replace batteries as needed
Replace water trap (18) filter as
needed
Battery
Compartment
T-STACK
GAS
USB
Leave Top
Port Open
CALIBRA
TION GAS
500 PPM C
O
FLOW METER
This quick start guide provides basic infor-
mation. For safety warnings, additional
instructions, and more detailed informa-
tion, refer to the Configuration and Opera-
tion manual (part number 0024-9486)
available at www.MyBacharach.com.
T-
STA
CK
GAS
USB
BOTTOM
VIEW
Filter
Wait for warm-up to complete
Full
Medium
Low
Replace
O
2
Cap
O
2
Sensor
Slot
Nub
CO
Cap
Printed Circuit Board
CO Sensor
Open
Closed
