AX-ALOC608
AX-ALOC608
AX-ALOC608
AX-ALOC608
AX-ALOC608
AX-ALOC608
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Wire Color & Function:
The audio input wire colors are an EIA
standard for
car stereo
applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front + Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE:
Be sure that all audio input connections are polarized or
in phase with each other. That is, the positive output wires from
the audio source need to be connected to the corresponding
positive input wires of the AX-ALOC608. The same goes for the
negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Adjusting the AX-ALOC608 for maximum performance:
After completing all of the necessary connections, turn the AX-
ALOC608 adjustment pots all of the way down by rotating them
completely counter-clockwise. Now, turn the stereo system on
and adjust the main volume control on the stereo to approxi-
mately ¾ maximum volume. Select one of the adjustment pots
on the AX-ALOC608 and turn it slowly clockwise until you notice
audio distortion and then stop. Turn the remaining pot to the
same position as the previously adjusted pot. The audio set-up
of the AX-ALOC608 is now complete and ready to be enjoyed.
Wire Color & Function:
The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front + Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE:
Be sure that all audio input connections are polarized or
in phase with each other. That is, the positive output wires from
the audio source need to be connected to the corresponding
positive input wires of the AX-ALOC608. The same goes for the
negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Adjusting the AX-ALOC608 for maximum performance:
After completing all of the necessary connections, turn the AX-
ALOC608 adjustment pots all of the way down by rotating them
completely counter-clockwise. Now, turn the stereo system on
and adjust the main volume control on the stereo to approxi-
mately ¾ maximum volume. Select one of the adjustment pots
on the AX-ALOC608 and turn it slowly clockwise until you notice
audio distortion and then stop. Turn the remaining pot to the
same position as the previously adjusted pot. The audio set-up
of the AX-ALOC608 is now complete and ready to be enjoyed.
Wire Color & Function:
The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front + Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE:
Be sure that all audio input connections are polarized or
in phase with each other. That is, the positive output wires from
the audio source need to be connected to the corresponding
positive input wires of the AX-ALOC608. The same goes for the
negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Adjusting the AX-ALOC608 for maximum performance:
After completing all of the necessary connections, turn the AX-
ALOC608 adjustment pots all of the way down by rotating them
completely counter-clockwise. Now, turn the stereo system on
and adjust the main volume control on the stereo to approxi-
mately ¾ maximum volume. Select one of the adjustment pots
on the AX-ALOC608 and turn it slowly clockwise until you notice
audio distortion and then stop. Turn the remaining pot to the
same position as the previously adjusted pot. The audio set-up
of the AX-ALOC608 is now complete and ready to be enjoyed.
Wire Color & Function:
The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front + Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE:
Be sure that all audio input connections are polarized or
in phase with each other. That is, the positive output wires from
the audio source need to be connected to the corresponding
positive input wires of the AX-ALOC608. The same goes for the
negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Adjusting the AX-ALOC608 for maximum performance:
After completing all of the necessary connections, turn the AX-
ALOC608 adjustment pots all of the way down by rotating them
completely counter-clockwise. Now, turn the stereo system on
and adjust the main volume control on the stereo to approxi-
mately ¾ maximum volume. Select one of the adjustment pots
on the AX-ALOC608 and turn it slowly clockwise until you notice
audio distortion and then stop. Turn the remaining pot to the
same position as the previously adjusted pot. The audio set-up
of the AX-ALOC608 is now complete and ready to be enjoyed.
Wire Color & Function:
The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front + Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE:
Be sure that all audio input connections are polarized or
in phase with each other. That is, the positive output wires from
the audio source need to be connected to the corresponding
positive input wires of the AX-ALOC608. The same goes for the
negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Adjusting the AX-ALOC608 for maximum performance:
After completing all of the necessary connections, turn the AX-
ALOC608 adjustment pots all of the way down by rotating them
completely counter-clockwise. Now, turn the stereo system on
and adjust the main volume control on the stereo to approxi-
mately ¾ maximum volume. Select one of the adjustment pots
on the AX-ALOC608 and turn it slowly clockwise until you notice
audio distortion and then stop. Turn the remaining pot to the
same position as the previously adjusted pot. The audio set-up
of the AX-ALOC608 is now complete and ready to be enjoyed.
Wire Color & Function:
The audio input wire colors are an EIA
standard for car stereo applications as follows.
INPUT HARNESS
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front + Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK = Reference Ground (-)
(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE:
Be sure that all audio input connections are polarized or
in phase with each other. That is, the positive output wires from
the audio source need to be connected to the corresponding
positive input wires of the AX-ALOC608. The same goes for the
negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Adjusting the AX-ALOC608 for maximum performance:
After completing all of the necessary connections, turn the AX-
ALOC608 adjustment pots all of the way down by rotating them
completely counter-clockwise. Now, turn the stereo system on
and adjust the main volume control on the stereo to approxi-
mately ¾ maximum volume. Select one of the adjustment pots
on the AX-ALOC608 and turn it slowly clockwise until you notice
audio distortion and then stop. Turn the remaining pot to the
same position as the previously adjusted pot. The audio set-up
of the AX-ALOC608 is now complete and ready to be enjoyed.
