RFQ5, SLQ5
MASTER & SLAVE CONTROLLERS
FOR RGBW LED TAPE
Item ref: 156.738UK, 156.739UK
User Manual
WARNING
: This product is intended for professional installation of dual colour LED tape and should be connected by
qualified personnel in accordance with electrical safety standards. Ensure that the rated load indicated is not exceeded.
Installation
The RFQ5 and SLQ5 controllers can be employed to control
Lyyt
RGBW 4-colour LED tape operating from a 5-24Vdc
power supply. The rated current load is 3 x 2A (RGB) + 3A (W), operating up to 5m of
Lyyt
RGBW 60/m LED tape
(156.740UK) or 10m of
Lyyt
RGBW 30/m LED tape (156.741UK).
Connect the DC jack to a power supply suitable for the LED tape (must be 5-24Vdc for the controller)
Connect the 5-pin coupler to the end connection on the
Lyyt
RGBW tape.
Ensure that the black “+” wire is connected to the positive connection on the LED tape. The LED tape will just not light if
the controller is accidentally connected in reverse.
