background image

D

EF

EN

CE

  R

ECO

GNISED

  SU

PP

LIE

R

Department of Defence

        

Avlite Systems

AUSTRALIA

t:

 +61 (0)3 5977 6128

USA

t: 

+1 (603) 737 1310

w: 

www.avlite.com

e: 

[email protected]

Avlite Systems’ AV-09-4WL Solar Windsock Light Kit provides users with a 

complete, reliable and low maintenance solution to windsock illumination.

This complete windsock lighting kit incorporates four (4) AV-09 lights mounted onto 12mm 

powder-coated square tubing arms, a 140watt multicrystalline solar module and mounting 

bracket, and 110Ah SLA battery (2 X 55Ah) housed in a rotationally moulded weatherproof 

battery box with galvanized lockable cage for improved security.
Each AV-09 light incorporates a 3watt ultra-high intensity LED as a light source offering up 

to 100,000 hours of service - no need to change any globes! With low power consumption 

and external sun-switch for automatic night activation, the AV-09-4WL is a fantastic 

alternative to traditional hard-wired or fluorescent products.
The AV-09-4WL can be installed immediately and requires no costly underground wiring. 

The complete kit comes packaged in a 155x69x76cm pallet for ease of shipping. Other 

configurations are available on request.

Features

• Integrated solar/battery system
• 140watt solar module 

(standard)

• 2 x 55Ah SLA batteries 

(standard)

Typical Applications

• Lighting kit to suit existing 

windsock assemblies

Solar Powered Windsock Light Kit

AV-09-4WL

Solar module/battery  

configuration of  

AV-09-4WL Windsock Light

AV-09 lights with 3watt 

ultra-high intensity LED - 

no globes to change! 

Solar module mounted 

for maximum solar 

collection

Flexible installation with 

adjustable 2-piece 

clamp  

(50-150mm pipe)

Weatherproof battery 

box and lockable 

galvanised cage for 

improved security

Windsock & pole 

not included

Summary of Contents for AV-09-4WL































Reviews: