Smart ATO micro FAQ AUG. 2018 v.2
Copyright ©2018 AUTOAQUA Technologies Co., Ltd. All rights reserved
Smart ATO micro FAQ
1.
How to set up the siphon break properly?
2.
Are drops of water from the siphon break a normal phenomenon
3.
What will happen if the siphon break is not set up properly?
4.
Why is the head height not high enough?
5.
Is there an alert when the reservoir is empty?
6.
Can Smart ATO micro still work if the glass is not transparent?
7.
How does the redundancy work for the Smart ATO micro?
8.
Why is the water level always a little higher than the sensor? Is the
9.
Why does the red LED flash with audible alert? I have checked the
water reservoir and the bubble but there is no problem.
10.
How to use other pumps with Smart ATO micro?
11.
How to extend the cable length of the pump/solenoid valve/power
12.
Can I use the solenoid valve with Smart ATO micro? How to install it?
13.
