background image

 

 

AMISMCS1 

Microphone Splitter/Combiner

 

 

Introduction

 

 
The Australian Monitor Installation Series MCS1 mic splitter/combiner 

produces 2 balanced XLR signals, (1 direct, 1 transformer isolated) from a 
single balanced XLR input. The AMIS MCS1 provides a ground lift switch to 
eliminate hum, & as part of the AMIS Contractor Tools range, the AMIS 

MCS1 is an inexpensive splitter/combiner that has a multitude of uses in a 
wide variety of installations. 

 

Description

 

 

 

Input: 

This balanced XLR input receives signal from a mic or other 

source. 

 

Thru Output:

 This balanced XLR output is wired in parallel to the Input 

& provides a balanced signal output. 

 

Output:

 This XLR output provides a transformer isolated output of the 

input signal feed. 

 

GND Lift Switch:

 When this switch is in “ground” position pin1 of both 

the input & the output are connected. When this switch is in “lift” 
position these grounds are separated. This switch is used to 
eliminate hum. 

 

Specifications

 

 

 Input 

impedance: 

 

600 Ohms 

 

Output Impedance:  

600 Ohms 

 

Dimensions:  

 

95mm x 73mm x 40mm 

 

Weight:    

305.5g

 

 

Отзывы: