TONNEAU INSTALLATION INSTRUCTIONS
FORD RANGER PX SINGLE CAB WITH HEADBOARD (CHECK IMAGE)
JUNE 2013 – CURRENT
PART NUMBER: ATB01030
BASIC TOOLS REQUIRED
-
Rivet gun, Drill, 4.5mm Drill bit, Measuring tape, Silicon sealant, Anti-corrosive primer.
CONTENTS
1 x Tonneau cover
3 x Aluminium rope track (476mm)
4 x Bar Brackets
2 x Tonneau support bar
18 x Buttons
35 x Rivets
4 x Pieces of dowel 1 x Seal Tape
1 x Seal Template 1 x Fitting Instruction
(Some parts in the fitting kit may not be required. All fitting kits are weighed to ensure accurate quantities.)
1.
INSTALLATION PROCEDURE
– IMPORTANT –
THE HEADBOARD ON THIS VEHICLE WAS CHANGED IN MAY 2013.
PLEASE REFER TO THE IMAGE BELOW TO CONFIRM THE
HEADBOARD ON THE VEHICLE MATHCES THE IMAGE ON THE RIGHT HAND SIDE.
