![background image](http://html.mh-extra.com/html/audix/mgn-series/mgn-series_manual_3015685001.webp)
MGN Series
OVERVIEW
The Micro-Gooseneck (MGN) series consists of 3 extension pieces for the Micros™
series condenser microphones. Each model is a lightweight tube with a mini-XLRf
connector on the top and a standard XLRm connector on the base. There are flexible
goosenecks at each end of the tube. There is balanced cable inside the tube, with pin
2 hot in respect to pin 3.
The MGN series is designed to work with any of the Micros™ series; M1250B,
M1255B, M1280.
SUPPLIED ACCESSORIES
There are three models: MGN6 is 6 inches (152mm) in length,
MGN-14 is14 inches (355mm) in length, MGN20 is 20 in (508mm)
in length.
ASSEMBLY INSTRUCTIONS
To assemble, place the mini-XLRm of the Micros™ series microphone against the mini-
XLRf end of the MGN tube. Line up the pins and push gently until the microphone
click/locks into place. The XLRm base can fit into any XLRf connector, or into the XLRf
port on the ATS10 or ATS1 weighted stand. (See Below)
Micro-Goosenecks
MGN SERIES
MGN20 MGN14 MGN6
1
2
3
4
5
[Product shown is an MGN6; assembly process is the same for each model.]