Description
The TX6000 is a high specification, single rack space, 6 channel mic/line mixer suitable for desk or rack mounting. The mixer is
designed to operate from both AC mains power as well as 24 volts DC.
Inputs
Six dual mic/line inputs are provided. The mic inputs are active balanced and feature 3 pin XLR female sockets. Each channel
also includes dual female RCA line/aux sockets.
Outputs
The TX6000 features a balanced line output via a 3 pin XLR male socket. A mono tape output is also available via dual female
RCA sockets. A 1/4” mono headphone socket is included on the front panel.
Controls
Front panel controls include a master output level control plus overall bass and treble controls. Individual channel level controls
are provided for all six inputs.
Metering
A 7 segment LED meter is provided for the master output. A power "on" neon is included on the power switch.
Muting
Muting is available via the optional VOX operated plug-in TX3010 or TX3014 VOX precedence cards. The TX3010 provides
priority from channel 1 over all other channels. The TX3014 provides two levels of priority. Channel 1 is the master mute channel
and overrides channels 2-6, whereas channels 2 will mute channels 3-6 only.
Tone Generators
The ATC5488 is an optional plug-in accessory providing 4 tones (Bell, Pre-Announce Chime, Alert and Evacuate). The evacuate
and alert tones comply with Australian Standard AS2220.1. The ATC5488 plugs into the main board via a 7 pin connector.
Activation wires can be fed through a rear panel slot below the 24V DC connector. Each tone can be activated by a simple
contact closure.
Phantom Power
Phantom power (18V DC) is provided on all mic inputs
EMC Compliance
The TX6000 is approved to Spectrum Management Agency EMC, C-Tick standards.
TX6000
6 Channel Mic/Line
Mixer
Audio Telex Communications Pty Ltd
www.audiotelex.com
Sydney (02) 9647 1411, Melbourne (03) 9890 7477, Brisbane (07) 3852 1312, Perth (08) 9228 4222
Auckland (09) 415 9426, Adelaide (08) 8234 9444, Hobart (03) 6228 6373
A.C.N: 001 345 482
