MCX CRIMP CONNECTOR FOR RG59 HEC2 CABLE
(MPMCX-HEC2)
Step 1:
Requires 0.350” recommended or 0.346”crimp tool.
Step 2:
Strip cable to standard 1/4” - 1/4”.
Fold all braid and outer foil back.
IMPORTANT:
Over extending center pin length
WILL DAMAGE CONNECTORS
. Under extending will make
intermittent electrical contact.
Step 3:
Insert center conductor into connector receptacle and apply pressure with a
twisting motion until cable is fully inserted.
Inspect before crimping.
No braid should appear outside of the connector body (likely indicates
connector not inserted fully).
Step 4:
Fully crimp tool until it releases and gently remove the connector.
MAXNET
®
II – MCX Crimp Connector for RG59 HEC2 Cable (MPMCX-HEC2) Installation Instructions
MCX Crimp Connector for RG59 HEC2 Cable(MPMCX-HEC2) Installation Instructions
Page 1 of 2
U.S.#s 7,142,414 & 7,025,630
ATX
Confi dential & Proprietary
